References
R. M. OGORKIEWICZ, “The Engineering Properties of Thermoplastics”, Engineering Design Guide No. 17 (Oxford University Press, London, 1976).
P. C. POWELL, “The Selection and Use of Thermoplastics”, Engineering Design Guide No. 19 (Oxford University Press, London, 1977).
G. C. IVES, J. A. MEAD and M. M. RILEY, “Handbook of Plastics Test Methods’ (Iliffe, London, 1971).
R. F. STAATS-WESTOVER and S. MATSUOKA, “A Critical Review of ASTM D-638 Tensile Test Method for Plastic”, Proceedings of SPE Antec, Boston (1982) p. 25.
G. P. MARSHALL, “A Critique of Standards for Plastics in Engineering Applications”, Plastics and Rubber International, 7, No. 3 (1982) p. 146.
ASTM D790-71 (reapproved 1978) “Standard Test Methods for Flexural Properties of Plastics and Electrical Insulating Materials” (ASTM, Philadelphia, USA).
W. A. ZINZOW, ASTM Bulletin No. 134 (May 1945) p. 31.
E. M. SCHOENBORN, G. R. PROCTOR and J. CARVAJAL, ASTM Bulletin No. 134 (May 1945) p. 42.
J. W. WESTWATER, “Flexure Testing of Plastic Materials” 52nd Annual Technical Meeting of ASTM (1949) p. 1092.
P. P. BENHAM and F. V. WARNOCK, “Mechanics of Solids and Structures” (Pitman, London, 1976).
J. G. WILLIAMS, “Stress Analysis of Polymers” (Ellis Harwood Ltd., Chichester, 1980).
C. M. R. DUNN and S. TURNER, “Modulus and Creep in Flexure of Plastics! Apparatus and Technique for Accurate Measurements”, Plastics and Polymers (February 1972) p. 26.
R. D. HEAP and R. H. NORMAN, “Flexural Testing of Plastics” (The Plastics and Rubber Institute, London, 1969).
Y. YIGSAW, MSc thesis, The Queen's University of Belfast (1982).
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Crawford, R.J., Yigsaw, Y. A study of the effect of test variables on the flexural modulus of plastics. J Mater Sci Lett 3, 171–176 (1984). https://doi.org/10.1007/BF00723107
Received:
Accepted:
Issue Date:
DOI: https://doi.org/10.1007/BF00723107