References
R. W. CAHN,Nature 260 (1976) 285.
H. JONES,Mater. Sci. Eng. 5 (1969) 1.
M. LARIDJANI, P. RAMACHANDRARAO and R. W. CAHN,J. Mater. Sci. 7 (1972) 627.
W. A. ELLIOT, F. P. GAGLIANO and G. KRAUSS,Appl. Phys. Lett. 21 (1972) 23.
Idem, Met. Trans. 4 (1973) 2031.
E. M. BREINAN, B. H. KEAR and C. M. BANAS,Phys. Today 29 (1976) 44.
E. M. BREINAN, B. H. KEAR, C. M. BANAS and L. E. GREENWALD, in “Superalloys-Metallurgy and Manufacture”, edited by B. H. Kear (American Institute of Mining and Metallurgical Engineering, New York, 1976) p. 435.
M. VON ALLMEN, S. S. LAU, MÄENPÄÄ and B. Y. TSAUR,Appl. Phys. Lett. 36 (1980) 205.
R. BECKER, G. SEPOLD and P. L. RYDER,Scripta Metall. 14 (1980) 1283.
P. MAZZOLDI, G. DELLA MEA, G. BATTAGLIN, A. MIOTELLO, M. SERVIDORI, D. BACCI and E. JANNITTI,Phys. Rev. Lett. 44 (1980) 88.
H. W. BERGMANN and B. L. MORDIKE,Z. Metallkunde 71 (1980) 658.
Idem, J. Mater. Sci. 16 (1981) 863.
H. W. BERGMANN and B. L. MORDIKE, in “Rapidly Solidified Amorphous and Crystalline Alloys”, edited by B. H. Kear, B. C. Giessen and M. Cohen (North-Holland, New York, 1982) p. 497.
H. W. BERGMANN and B. L. MORDIKE, in Proceedings of the 4th International Conference on Rapidly Quenched Metals”, Vol. 1, edited by T. Masumoto and K. Suzuki (The Japan Institute of Metals, Sendai, 1982) p. 181.
S. C. HSU, S. CHAKRAVORTY and R. MEHRABIAN,Met. Trans. B. 9B (1978) 221.
H. W. BERGMANN, H. W. FRITSCH and G. HUNGER,J. Mater. Sci. 16 (1981) 1935.
R. MEHRABIAN,Int. Met. Rev. 27 (1982) 185.
C. ANTONIONE, L. BATTEZZATI, A. LUCCI, G. RIONTINO, M. C. TABASSO and G. VENTURELLO,J. Phys. Suppl. n. 8 41 (1980) C8–131.
F. F. ABRAHAM, N. H. TSAI and G. M. POUND,Surf. Sci. 78 (1978) 181.
S. YATSUYA and T. B. MASSALSKI, in “Proceedings of the 4th International Conference on Rapidly Quenched Metals”, Vol. 1, edited by T. Masumoto and K. Suzuki (The Japan Institute of Metals, Sendai, 1982) p. 169.
C. ANTONIONE, L. BATTEZZATI, A. LUCCI, G. RIONTINO and G. VENTURELLO,Metall. Ital. 73 (1981) 118.
W. J. BOETTINGER, F. S. BIANCANIELLO, G. M. KALONIJ and J. W. CAHN, in “Rapid Solidification Processing: Principles and Technologies II”, edited by R. Mehrabian, B. H. Kear and M. Cohen (Claitor's, Baton Rouge, 1980) p. 50.
W. J. BOETTINGER, in “Rapidly Solidified Amorphous and Crystalline Alloys”, edited by B. H. Kear, B. C. Giessen and M. Cohen (North-Holland, New York, 1982) p. 15.
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Antonione, C., Bacci, D., Battezzati, L. et al. Surface amorphous and crystalline structures in laser glazed Fe-Ni-P-B and Fe-Ni-Cr-P-B alloys. J Mater Sci Lett 3, 141–144 (1984). https://doi.org/10.1007/BF00723098
Received:
Accepted:
Issue Date:
DOI: https://doi.org/10.1007/BF00723098