Literature cited
H. Diamond, D. C. Kennedy, and P. G. Larsen, Ind. Eng. Chem.,44, No. 8, 1834–1843 (1954).
K. K. Papok, A. P. Zarubin, and N. I. Petrova, Khim. Tekhnol. Topl. Masel., No. 7, 43–44 (1973).
A. Ali, F. E. Lockwood, E. E. Klaus, et al., ASLE Trans.22, No. 3, 267–276 (1981).
F. E. Lockwood and E. E. Klaus, ASLE Trans.24, No. 2, 276–283 (1981).
J. Lahijani, F. E. Lockwood, and E. E. Klaus, ASLE Trans.25, No. 1, 25–32 (1982).
B. G. Bal'kov, I. P. Skibida, and Z. K. Maizus, Izv. Akad. Nauk SSSR, Ser. Khim., No. 7, 1470–1475 (1969).
B. G. Bal'kov, et al., Izv. Akad. Nauk SSSR, Ser. Khim., No. 7, 1475–1480 (1969).
É. Stern, Usp. Khim.,62, No. 2, 232–272 (1973).
E. T. Denisov and G. I. Kovalev, Oxidation and Stabilization of Jet Fuels [in Russian], Khimiya, Moscow (1983).
E. E. Klaus and V. Krishnamashar, “Development and use of the microoxidation test with crankcase oil,” U. S. Dept. Commer. Natl. Bur. Stand., Spec. Publ. No. 674, 155–167 (1984).
E. T. Denisov and N. M. Émanuel', Usp. Khim.,29, No. 12, 1409–1438 (1960).
D. B. Clark, E. E. Klaus, and S. M. Hsu, Lubr. Eng.41, No. 5, 280–287 (1985).
F. E. Lockwood and E. E. Klaus, ASLE Trans.,25, No. 2, 236–244 (1982).
E. E. Klaus and E. J. Tewksbury, Lubr. Eng.29, No. 5, 205–211 (1973).
J. Bernard (editor), Oxidation of Metals, Vol. 1 [Russian translation], Metallurgiya, Moscow (1968).
Additional information
Translated from Khimiya i Tekhnologiya Topliv i Masel, No. 3, pp. 30–31, March, 1989.
Rights and permissions
About this article
Cite this article
Ivanov, A.V., Balak, G.M., Aleshina, T.S. et al. Influence of metals on thermal oxidation stability of KS-19 oil. Chem Technol Fuels Oils 25, 174–176 (1989). https://doi.org/10.1007/BF00722968
Issue Date:
DOI: https://doi.org/10.1007/BF00722968