References
J. W. DIGGLE, T. C. DOWNIE and C. W. GOULDING,Chem. Rev. 69 (1969) 365.
S. TAJIMA, in “Advances in corrosion science and technology”, edited by R. W. Staehle, Vol. 1 (Plenum Press, New York, 1970) p. 229.
G. C. WOOD, in “Oxide and oxide films”, edited by J. W. Diggle and A. K. Vijh, Vol. 2 (Marcel Dekker, New York, 1972) p. 167.
J. ZAHAVI, A. ZANGVIL and M. METZGER,J. Electrochem. Soc. 125 (1978) 438.
G. C. WOOD and A. J. BROOK,Trans. Inst. Met. Finish. 44 (1966) 189.
J. COTE, E. E. HOWLETT, M. J. WHEELER and H. J. LAMB,Plating 56 (1969) 386.
R. C. FURNEAUX, G. E. THOMPSON and G. C. WOOD,Corros. Sci. 18 (1978) 853.
M. F. ABD RABBO, J. A. RICHARDSON and G. C. WOOD, ibid.16 (1976) 689.
H. TAKAHASHI, K. FUJIMOTO, H. KONNO and M. NAGAYAMA,J. Electrochem. Soc. 131 (1984) 1856.
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Shimizu, K., Thompson, G.E., Wood, G.C. et al. Anodic oxide growth on Al3Fe particles dispersed in an Al-0.5%Fe alloy. J Mater Sci Lett 10, 709–711 (1991). https://doi.org/10.1007/BF00722776
Received:
Accepted:
Issue Date:
DOI: https://doi.org/10.1007/BF00722776