Kinetics of fatigue failure of constructional steels of different strength categories in high parameter water
KeywordsFatigue Fatigue Failure Parameter Water High Parameter Strength Category
These keywords were added by machine and not by the authors. This process is experimental and the keywords may be updated as the learning algorithm improves.
Unable to display preview. Download preview PDF.
- 1.V. V. Panasyuk, L. V. Ratych, Yu. I. Zvezdin, et al., “Cyclic corrosion crack resistance curves of certain casing steels,” Fiz.-Khim. Mekh. Mater., No. 3, 37–45 (1985).Google Scholar
- 2.T. Herbert, J. Hild, and E. Kiss, “Fatigue crack growth in SA-508CR2 steel in a medium of high purity water heated to high temperature,” Tr. Am. Obshch. Inzh.-Mekh. Ser. D. Teor. Osn. Inzh. Rasch.,96, No. 3, 13–20 (1974).Google Scholar
- 3.W. H. Bamford, “The effect of pressurized water reactor environment on fatigue crack propagation of pressure vessel steels,” in: The Influence of Environment on Fatigue, No. 4 (1977), pp. 51–56.Google Scholar
- 4.P. M. Scott and A. E. Truswell, “Corrosion fatigue crack growth in reactor pressure vessel steels in PWR primary water,” Trans. ASME, J. Pres. Ves. Tech.,105, No. 3, 245–254 (1983).Google Scholar
- 5.P. Paris and F. Erdogan, “A critical analysis of the rules of crack propagation,” Tr. Am. Obshch. Inzh.-Mekh. Ser. E. Prikl. Mekh., No. 4, 60–68 (1963).Google Scholar
- 6.Codes of American Society of Mechanical Engineers for Boilers and High Pressure Vessels [in Russian], Moscow (1973).Google Scholar
- 7.G. P. Karzov, V. P. Leonov, and B. T. Timofeev, “Evaluation of the cyclic strength of welded assemblies with production defects,” in: The Low-Cycle Fatigue of Welded Structures [in Russian], Leningrad. Dom. Nauch. Tekh. Prop. (1973), pp. 57–62.Google Scholar
© Plenum Publishing Corporation 1987