References
S. L. PHOENIX, ASTM STP 546 (American Society for Testing and Materials, Philadelphia, 1974) p. 130.
R. F. SMALLEY Jr, D. L. TURCOTTE and S. A. SOLLA,J. Geophys. Res. 90 (B2) (1985) 1894.
D. L. TURCOTTE, R. F. SMALLEY Jr. and S. A. SOLLA,Nature 313 (1985) 671.
J. H. K. KAO, in “Reliability Studies”, IRE Transactions on Reliability and Quality Control, PGRQC No. 13 (1958) p. 15.
J. S. WILLIAMS,Biometrics 34 (1978) 209.
R. W. HERTZBERG, “Deformation and Fracture Mechanics of Engineering materials” (Wiley, 1976).
W. WEIBULL,J. Appl. Mech. 73 (1951) 293.
N. R. MANN, R. E. SCHAFER and N. D. SINGPURWALLA, “Methods for Statistical Analysis of Reliability and Life Data” (Wiley, 1974) Ch. 9.
C. GALIOTIS and R. J. YOUNG,Polymer 24 (1983) 1023.
C. GALIOTIS, R. J. YOUNG and D. N. BATCHELDER,J. Mater. Sci. Lett. 2 (1983) 263.
C. GALIOTIS, R. T. READ, P. H. J. YEUNG, R. J. YOUNG, I. F. CHALMERS and D. BLOOR,J. Polym. Sci. (Polym. Phys.)22 (1984) 1589.
H. D. WAGNER, in “Application of Fracture Mechanics to Composite Materials”, edited by R. B. Pipes and K. Friedrich (Elsevier, in press).
Idem, submitted (1987).
Idem, submitted (1988).
H. D. WAGNER, S. L. PHOENIX and P. SCHWARTZ,J. Compos. Mater. 18 (1984) 312.
A. S. WATSON and R. L. SMITH,J. Mater. Sci. 20 (1985) 3260.
J. GUTANS and V. TAMUZS,Mech. Compos. Mater. 20 (6) (1984) 1107 (in Russian).
Author information
Authors and Affiliations
Additional information
On leave from the Department of Chemical Engineering, Eindhoven University of Technology, The Netherlands.
Rights and permissions
About this article
Cite this article
Steenbakkers, L.W., Wagner, H.D. Elasticity and mechanical breakdown of Kevlar 149 aramid fibres by a probabilistic approach. J Mater Sci Lett 7, 1209–1212 (1988). https://doi.org/10.1007/BF00722339
Received:
Accepted:
Issue Date:
DOI: https://doi.org/10.1007/BF00722339