Literature cited
M. A. Balter, B. T. Gurevich, and M. M. Gurovskii, “An investigation of the fatigue strength of samples strengthened by burnishing in relation to the original hardness, method of strengthening, and loading conditions,” in: Increasing the Life of Machine Parts by Surface Work Hardening [in Russian], Vol. 108, Tsent. Nauch.-Issled. Inst. Tekh. Mashinostr., Moscow (1965), pp. 146–158.
V. A. Veller, A. M. Veingarten, T. M. Goman, and V. A. Ostanina, “Increasing the fatigue strength of burnished shafts with the use of polymer coatings,” Vestn. Mashinostr., No. 1, 13–15 (1970).
G. N. Filimonov, V. I. Pokhmurskii, R. G. Pogoretskii, et al., “The fatigue strength of large surface strengthened shafts in a press connection,” Fiz.-Khim. Mekh. Mater., No. 3, 20–25 (1975).
S. T. Kheifets, “An analytical determination of the depth of the work hardened layer in roller burnishing of steel parts,” in: New Investigations in the Area of the Strength of Machine Construction Materials [in Russian], Vol. 49, Tsent. Nauch.-Issled. Inst. Tekh. Mashinostr., Mashgiz, Moscow (1952), pp. 7–17.
I. V. Kudryavtsev, Surface Work Hardening for Increasing the Strength and Life of Machine Parts [in Russian], Mashprom, Moscow (1966).
M. M. Shkol'nik, The Rate of Crack Growth and the Life of Metal [in Russian], Metallurgiya, Moscow (1973).
O. N. Romaniv, V. N. Simin'kovich, and V. G. Stepanov, “The effectiveness of the use of surface plastic deformation for preventing the development of cracks in cyclic loading,” Fiz.-Khim. Mekh. Mater., No. 2, 15–20 (1972).
R. G. Pogoretskii, I. I. Kadar, and I. A. Nironovich, “The effectiveness of certain methods of strengthening shafts in the zones of contact operating under conditions of fatigue and corrosion fatigue,” Vestn. Mashinostr., No. 10, 74–77 (1974).
D. D. Papshev, “Increasing the contact fatigue resistance of high strength (hardened) steels by surface work hardening,” Vestn. Mashinostr., No. 1, 35–38 (1970).
I. V. Kudryavtsev and L. M. Rozenman, “The removal of residual stresses in axial loads of surface work hardened rods,” Metalloved. Term. Obrab. Met., No. 7, 7–18 (1957).
V. I. Pokhmurskii, T. N. Kalichak, Ya. L. Poberezhnyi, and A. M. Krokhmal'nyi, “The kinetics of failure and of redistribution of residual stresses in cyclic deformation of burnished samples,” Fiz.-Khim. Mekh. Mater., No. 1, 53–56 (1975).
V. I. Pokhmurskii, T. N. Kalachak, and Ya. L. Poberezhnyi, “The kinetics of fatigue failure of samples surface strengthened by burnishing,” in: Reviews of Papers of the Fourth Scientific and Technical Conference on “Increasing the Cyclic Strength of Materials by Methods of Surface Plastic Deformation,” Perm (1974), pp. 13–14.
V. I. Pokhmurskii, Ya. L. Poberezhnyi, and T. N. Kalichak, “The rules of inelastic deformation of metals in cyclic loading in air and liquid media,” Fiz.-Khim. Mekh. Mater., No. 5, 3–12 (1978).
Author information
Authors and Affiliations
Additional information
Translated from Fiziko-Khimicheskaya Mekhanika Materialov, Vol. 16, No. 1, pp. 53–58, January–February, 1980.
Rights and permissions
About this article
Cite this article
Nironovich, I.A. Fatigue strength of samples strengthened by surface plastic deformation under fretting conditions. Mater Sci 16, 45–49 (1980). https://doi.org/10.1007/BF00722299
Received:
Issue Date:
DOI: https://doi.org/10.1007/BF00722299