Literature cited
L. A. Glikman, The Corrosion-Mechanical Strength of Metals [in Russian], Mashgiz, Leningrad (1955).
G. L. Shvarts and M. M. Kristal', The Corrosion of Chemical Equipment. Corrosion Cracking and Methods of Preventing It [in Russian], Mashgiz, Moscow (1958).
V. V. Romanov, The Corrosion Cracking of Metals [in Russian], Mashgiz, Moscow (1960).
P. A. Akol'zin and V. N. Gulyaev, The Corrosion Cracking of Austenitic Steels in Heat Power Equipment [in Russian], Gosénergoizdat, Moscow-Leningrad (1963).
V. P. Pogodin, V. L. Bogoyavlenskii, and V. P. Sentyurev, Intergranular Corrosion and Corrosion Cracking of Stainless Steels in Aqueous Media [in Russian], Atomizdat, Moscow (1970).
G. V. Karpenko and I. I. Vasilenko, The Corrosion Cracking of Steels [in Russian], Tekhnika, Kiev (1971).
F. F. Azhogin, Corrosion Cracking and the Protection of High Strength Steels [in Russian], Metallurgiya, Moscow (1974).
A. V. Ryabchenko, V. I. Gerasimov, and V. P. Sidorov, “The corrosion of austenitic steels under stress,” in: Corrosion and Protection from Corrosion [in Russian], Vol. 5, Vessoyuz. Inst. Nauch. Tekh. Inf., Moscow (1976).
V. V. Gerasimov and V. V. Gerasimova, The Corrosion Cracking of Austenitic Stainless Steels [in Russian], Metallurgiya, Moscow (1976).
I. I. Vasilenko and R. K. Melekhov, The Corrosion Cracking of Steels [in Russian], Naukova Dumka, Kiev (1977).
Kh. L. Logan, The Corrosion of Metals under Stress [in Russian], Metallurgiya, Moscow (1970).
R. N. Parkins, F. Matstsa, Zh. Ah. Roiela, and Zh. K. Skalli, “Methods of testing for corrosion under stress,” Zashch. Met., No. 5, 515–540 (1973).
A. V. Ryabchenkov and V. M. Nikiforova, “A unit and method for long-term corrosion strength testing,” in: The Influence of Corrosive Media and the Strength of Steel [in Russian], Book 77, Mashgiz, Moscow (1955), pp. 41–49.
V. V. Gerasimov, “Quantitative evaluation of the resistance of austenitic stainless steels to corrosion under stress,” Dokl. Akad. Nauk SSSR,212, NO. 6, 1404–1406 (1973).
F. F. Azhogin, “Determining the tendency of alloys toward corrosion cracking,” in: Methods of Testing, Inspecting, and Investigating Machine Building Materials [in Russian], Vol. 2, Mashinostroenie, Moscow (1974), pp. 151–158.
Yu. N. Rabotnov, “A possible mechanism of failure of metals in a corrosive medium,” Izv. Akad. Nauk SSSR, Otd. Tekh. Nauk, No. 6, 53–56 (1954).
O. Lissner, “Einfluß von Spannung und Temperatur bei Spannungskorrosionsversuchen,” Z. Metallkunde,43, No. 5, 147–150 (1952).
V. R. Regel', A. I. Slutsker, and É. E. Tomashevskii, The Kinetic Nature of the Strength of Solids [in Russian], Nauka, Moscow (1974).
B. A. Drozdovskii and Ya. B. Fridman, The Influence of Cracks on the Mechanical Properties of Constructional Steels [in Russian], Metallurgizdat, Moscow (1960).
Author information
Authors and Affiliations
Additional information
Translated from Fiziko-Khimicheskaya Mekhanika Materialov, Vol. 16, No. 1, pp. 13–23, January–February, 1980.
Rights and permissions
About this article
Cite this article
Nikitin, V.I. Determining the resistance of metallic materials to corrosion cracking. Mater Sci 16, 7–15 (1980). https://doi.org/10.1007/BF00722291
Received:
Issue Date:
DOI: https://doi.org/10.1007/BF00722291