This is a preview of subscription content, log in via an institution to check access.
References
W. E. QUIST, G. H. NARAYANAN and A. L. WINGERT, in “Aluminum-Lithium Alloys II”, edited by T. H. Sanders, Jr. and E. A. Starke, Jr (Metallurigical Society of AIME, Warrendale, PA, 1984) p. 313.
I. F. SAKATA, “Systematic Study of Transport Aircraft Incorporating Aluminium Alloys” (NASA-TR-165820, January 1982).
C. J. PEEL and B. EVANS, in Proceedings of International Conference on Metallurgy of Light Alloys (Institute of Metals, London, 1985).
Y. W. KIM, W. M. GRIFFITH and F. H. FROES,J. Metals 37(8) p. 27.
W. L. OTTO, Jr., “Metallurgical Factors Controlling Structure in High Strength Aluminum Powders,” (Air Force Materials Laboratory, Technical Report, AFML-TR-76-60, May 1976).
Y. W. KIM,Progress in Powder Metallurgy 54 (1987) 13.
F. R. BILLMANet al., in Proceedings of the 3rd International Conference on Rapid Solidification (National Bureau of Standards, Gaithersburg, MD, 1982) pp. 532–46.
S. FOX, H. M. FLOWER and D. S. McDARMAID, in “Aluminum-Lithium Alloys III”, edited by C. Bakeret al. (Institute of Metals, London, 1986) p. 264.
M. AHMAD,Metal. Trans. 18A (1987) 681.
D. J. FIELD, G. M. SCAMANS and E. P. BUTLER, in [1] “ p. 657.
D. J. FIELD, E. P. BUTLER and G. M. SCAMANS, in “Aluminum-Lithium Alloys”, edited by E. A. Starke, Jr. and T. H. Sanders, Jr., (The Metallurgical Society of AIME, Warrendale, PA, 1981) p. 325.
J. P. LYLE and W. S. CEBULAK,Metal. Trns. 6A (1975) 685–700.
K. K. SANKARAN, in “Consolidation Processing and Alternative Processing Methods for Powder Metallurgy Al-Cu-Mg-X Alloys”, NASA Contractor Report No. 178227.
E. J. LAVERNIA and N. J. GRANT,J. Mat. Sci. 22 (1987) 1521–29.
E. J. LAVERNIA, G. RAI and N. J. GRANT,Mat. Sci. Engng 79 (1986) 211–21.
I. G. PALMER, R. E. LEWIS and D. D. CROOKS, in [11] “ p. 241.
P. J. MESCHTER, J. E. O'NEIL and R. J. LEDERICH, in [1] “ p. 419.
R. J. KAR, J. W. BOHLEN and G. R. CHANANI, in [1] “ p. 255.
A. GYSLER, R. E. CROOKS and E. A. STARKE, Jr., in [11] “ p. 263.
S. KANG and N. J. GRANT,Mat. Sci. Engng 72 (1985) 155.
Int. J. Rapid Solidification 1 (1984) 155.
Metal. Trans. 18A (1987) 2037.
P. J. MESCHTER, R. J. LEDERICH and J. E. O'NEIL, in [8] “ p. 85.
E. J. LAVERNIA and N. J. GRANT,Mat. Sci. and Engng 98 (1988) 381.
P. S. GILMAN, in [10] “ p. 485.
S. J. DONACHIE and P. S. GILMAN, in [1] “ p. 507.
G. H. NARAYANAN,et al., Low Density Aluminum Alloy Development (Interim Report AFWAL Contract No. F33615-81-C-5053, May 1982).
P. J. MESCHTERet al., in International Conference on Aluminum Alloys, Charlottesville, VA, 1986.
E. J. LAVERNIA, G. W. McKEWAN and N. J. GRANT,Progress in Powder Metallurgy 42 (1986) 456.
E. J. LAVERNIA, T. ANDO and N. J. GRANT, in Proceedings of the First International Conference on Rapidly Solidified Materials, edited by P. W. Lee and R. Carbonara (American Society for Materials, Ohio, 1986) p. 29.
W. S. MILLERet al., “High Strength Powder Metallurgy Aluminum Alloys II”, edited by G. J. Hildeman and M. J. Koczak (Metallurgical Society of AIME, 1985) pp. 311–31.
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Srivatsan, T.S., Lavernia, E.J. The effect of oxides on mechanical properties of aluminium-lithium alloys. J Mater Sci Lett 9, 888–891 (1990). https://doi.org/10.1007/BF00722160
Received:
Accepted:
Issue Date:
DOI: https://doi.org/10.1007/BF00722160