Abstract
X-ray diffraction measurements were used to study residual stresses in the surface layers of WC-Co specimens after diamond wheel grinding. The presence of compressive macrostresses was established and the mechanism of their formation was considered. Data relating to grinding with diamond and other abrasive wheels were compared.
Similar content being viewed by others
References
R. G. Makhkamov, Izv. AN UzSSR, Seriya tekhnicheskikh nauk, no. 3, 1960.
R. G. Makhkamov, Vestnik mashinostroeniya, no. 8, 1960.
A. E. Gel'fand, Stanki i instrument, no. 10, 1964.
V. I. Ivanets, M. G. Loshak, Yu. I. Babei, and G. V. Karpenko, FKhMM [Soviet Materials Science], no. 6, 1966.
V. I. Tret'yakov, Sintered Hard Alloys [in Russian], Metallurgizdat, 1962.
G. S. Kreimer, Strength of Hard Alloys [in Russian], Izd. Metallurgiya, 1966.
J. Gurland, Transactions of American Society for Metals,50, 1063, 1958.
A. E. Koval'skii and L. Ka. Pivovarov, Izv. AN SSSR, OTN, Metallurgiya i toplivo, no. 6, 1959.
H. Pfau and B. Rix, Z. Metallkunde,43, no. 12, 1952.
A. E. Koval'skii, L. Kh. Pivovarov, and S. V. Semenovskaya, collection: Data on the Metallography and Technology of Fabrication of Sintered Hard Alloys, Refractory Metals, and Refractory Metal Compounds, Part II [in Russian], TsIIN, TsM, 1963.
A. E. Koval'skii, Sb. Krudov VNIITS, no. 1, Metallurgizdat, 1959.
L. Kh. Pivovarov and A. M. Vlasov, FMM, no. 1, 1964.
G. A. Malygin and V. A. Likhachev, ZL, no. 3, 1966.
E. Macherauch and G. Müller, Z. Angewandte Physik,13, no. 7, 1961.
I. M. Chaporova, V. I. Tret'yakov, E. A. Shetilina, and T. G. Makarenko, Sb. trudov VNIITS, no. 1, Metallurgizdat, 1959.
L. G. Kuklin, V. I. Sagalov, V. B. Serebrovskii, and S. P. Shabashov, Increasing the Strength and Wear Resistance of Hard Alloy Tools [in Russian], Mashgiz, Moscow-Sverdlovsk, 1960.
D. M. Vasil'ev and B. I. Smirnov, UFN, no. 3, 1961.
M. Ya. Fuks, L. S. Palatnik, A. I. Il'inskii, and V. V. Belozerov, FTT, no. 3, 1967.
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Gladkikh, L.I., Sverdlova, B.M. & Fuks, M.Y. Residual stresses in surface layers of carbide tool tips after diamond grinding. Mater Sci 4, 511–515 (1972). https://doi.org/10.1007/BF00721676
Issue Date:
DOI: https://doi.org/10.1007/BF00721676