Abstract
The investigation described in this paper was concerned with austenitic chromium-manganese steels characterized by various resistances to the martensitic transformation during plastic deformation. It was established that the influence of previous plastic deformation on the resistance of these steels to cavitation erosion varies. In each case it is necessary to consider both the susceptibility of austenite to decomposition (accompanied by the formation of martensite and ɛ-phase) under the influence of cavitation and various phase and structural transformations taking place in the steel as a result of previous plastic deformation.
Similar content being viewed by others
References
B. Cina, Acta. Met.,6, no. 12, 1958.
I. N. Bogachev, V. F. Egolaev, and L. S. Malinov, FMM, no. 4, 1963.
V. V. Gavranek, D. N. Bol'shutkin, et al., FMM, no. 2, 1960.
L. D. Chumakova, I. N. Bogachev, et al., FZhZh, no. 6, 1963.
V. Ya. Zubov, S. V. Grachev, and I. Ya. Pesin, Izv. VUZ. SSSR, Chernaya metallurgiya, no. 5, 1960.
O. P. Maksimova, Problems of Metallography and Metal Physics [in Russian], Metallurgiya, 1964.
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Malinov, L.S., Eismondt, T.D. Effect of previous plastic deformation on the resistance of chromium-manganese steels to cavitation erosion. Mater Sci 4, 507–510 (1972). https://doi.org/10.1007/BF00721675
Issue Date:
DOI: https://doi.org/10.1007/BF00721675