References
R. ROBERGE, in “Superconductor Materials Science”, edited by S. Foner and B. B. Schwartz (Plenum Press, New York, 1981) p. 389.
J. BEVK, J. P. HARBISON and J. L. BELL,J. Appl. Phys. 49 (1978) 6031.
P. D. FUNKENBUSCH, J. K. LEE and T. H. COURTNEY,Met. Trans. A18 (1987) 1249.
W. A. SPITZIG, A. R. PELTON and F. C. LAABS,Acta Metall. 35 (1987) 2427.
C. V. RENAUD, E. GREGORY and J. WONG, in “Advanced Cryogenic Engineering Materials” Vol. 34, edited by A. F. Clark and R. P. Reed (Plenum Press, New York, 1988) p. 435.
S. FONER,Appl. Phys. Lett. 49 (1986) 982.
J. D. VERHOEVEN, F. A. SCHMIDT, E. D. GIBSON, J. J. SUE, J. E. OSTENSON and D. K. FINNEMORE,IEEE Trans. Magn. MAG-17 (1981) 251.
R. ROBERGE, H. LEHUY and S. FONER, ibid.MAG-19 (1983) 560.
S. POURRAHIMI, C. L. H. THIEME and S. FONER,Appl. Phys. Lett. 48 (1986) 1808.
J. OTUBO, S. POURRAHIMI, H. ZHANG, C. L. H. THIEME and S. FONER, ibid.42 (1983) 49.
C. L. TRYBUS, W. A. SPITZIG, J. D. VERHOEVEN and F. A. SCHMIDT, in “Processing and Properties for Powder Metallurgy Composites” edited by P. Kumar, K. Vedula and A. Ritter (The Metallurgical Society, 1988) p. 97.
C. L. TRYBUS, J. D. VERHOEVEN, F. A. SCHMIDT and W. A. SPITZIG,J. Mater. Sci. Lett. 7 (1988) 532.
F. P. LEVI,J. Appl. Phys. 31 (1960) 1469.
J. BEVK, W. A. SUNDER, G. DUBLON and E. COHEN, in “In situ Composites IV”, edited by F. D. Lemkey, H. E. Cline and M. McLean (Elsevier, Amsterdam, 1982) p. 121.
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Pourrahimi, S., Nayeb Hashemi, H. & Foner, S. High-strength high-conductivity Cu-Nb microcomposite wire by powder metallurgy. J Mater Sci Lett 9, 1484–1487 (1990). https://doi.org/10.1007/BF00721624
Received:
Accepted:
Issue Date:
DOI: https://doi.org/10.1007/BF00721624