Abstract
Time-to-rupture and creep of polymethyl methacrylate (PMM) under the combined influence of stress, active liquid media, and γ-radiation were studied. It was shown that time-to-rupture of PMM under these conditions is determined mainly by the influence of the working medium when the absorbed radiation dose is less than about 10 Mrads and that γ-radiation increases the creep rate of PMM in active liquid media.
Similar content being viewed by others
References
A. A. Velikovskii, A. N. Tynnyi, and V. S. Karasev, FKhMM [Soviet Materials Science], no. 4, 1968.
A. N. Tynnyi, S. I. Mikitishin, A. A. Velikovskii, Yu. N. Khomitskii, and Yu. A. Kolevatov, FKhMM [Soviet Materials Science], no. 1, 1967.
T. B. Boboev, V. R. Regel, T. P. Sanfirova, and N. N. Chernyi, Mekhanika polimerov [Polymer Mechanics], 4, 661, 1968.
M. A. Mokul'skii, Yu. S. Lazurkin, M. B. Fiveiskii, and V. I. Kozin, Vysokomolekulyarnye soedineniya, no. 1, 1960.
M. A. Mokul'skii, Yu. S. Lazurkin, and M. B. Fiveiskii, Vysokomolekulyarnye soedineniya, no. 1, 1960.
A. I. Soshko, A. N. Tynnyi, and M. M. Gudimov, FKhMM [Soviet Materials Science], no. 5, 1965.
A. N. Tynnyi and A. I. Soshko, FKhMM, no. 1, 1967.
E. S. Osikina and M. M. Gudimov, FKhMM [Soviet Materials Science], no. 1, 1967.
S. I. Mikitishin, A. N. Tynnyi, and Z. A. Bazi-levich, FKhMM [Soviet Materials Science], no. 4, 1968.
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Tynnyi, A.N., Bazilevich, Z.A., Mikitishin, S.I. et al. Investigation of time-to-rupture of polymethyl methacrylate under the combined influence of active liquid media and γ-radiation. Mater Sci 5, 242–244 (1972). https://doi.org/10.1007/BF00721203
Issue Date:
DOI: https://doi.org/10.1007/BF00721203