Advertisement

Limiting equilibrium and the development of angled cracks. Review of criteria

  • S. Ya. Yarema
  • G. S. Ivanitskaya
Article

Keywords

Angle Crack 
These keywords were added by machine and not by the authors. This process is experimental and the keywords may be updated as the learning algorithm improves.

Preview

Unable to display preview. Download preview PDF.

Unable to display preview. Download preview PDF.

Literature cited

  1. 1.
    K. Wieghardt, “Über das Spalten und Zerreissen elastischer Körper,” Z. Math. Phys.,55, 60–103 (1907).Google Scholar
  2. 2.
    A. A. Griffith, “The theory of rupture,” Proceedings of the 1st International Congress on Applied Mechanics (Delft, 1924), J. Waltman, Jr., Delft (1925), pp. 55–63.Google Scholar
  3. 3.
    G. P. Cherepanov, “Problem of impressing an indentor with the formation of a crack,” Prikl. Mat. Mekh.,27, No. 1, 150–153 (1963).Google Scholar
  4. 4.
    F. Érdogan and G. C. Sih, “On the crack extension in plates under plane loading and transverse shear,” Trans. ASME D,85, No. 4, 519–527 (1963).Google Scholar
  5. 5.
    V. V. Panasyuk and L. T. Berezhnitskii, “Determination of the limiting forces accompanying extension of a plate with an arc-shaped crack,” Vopr. Mekh. Real'nogo Tverd. Tela, No. 3, 5–19 (1964).Google Scholar
  6. 6.
    G. I. Barenblatt and G. P. Cherepanov, “Brittle sliding cracks,” Prikl. Mat. Mekh.,25, No. 6, 1110–1119 (1961).Google Scholar
  7. 7.
    V. V. Panasyuk, L. T. Berezhnitskii, and S. E. Kovchik, “Propagation of an arbitrary oriented rectilinear crack with extension of a plate,” Prikl. Mekh., No. 2, 48–55 (1965).Google Scholar
  8. 8.
    V. V. Panasyuk, Limiting Equilibrium of Brittle Solids with Fractures, Mgmt. Info. Serv. (1969); V. V. Panasyuk, ‘Fracture’ of brittle bodies in a plane stressed state,” Prikl. Mekh., No. 9, 26–34 (1965).Google Scholar
  9. 9.
    V. V. Panasyuk and A. E. Andreikiv, “‘Fracture’ of a brittle body with a diskotic circular crack,” Prikl. Mekh., No. 12, 28–33 (1967).Google Scholar
  10. 10.
    V. V. Panasyuk and A. E. Andreikiv, “Limiting-equilibrium state of an unbounded brittle body with an arbitrarily oriented elliptical crack,” Fiz. Khim. Mekh. Mater., No. 1, 116–118 (1969).Google Scholar
  11. 11.
    G. P. Cherepanov, Mechanics of Brittle Fracture [in Russian], Nauka, Moscow (1974).Google Scholar
  12. 12.
    K. Palaniswamy and W. G. Knauss, “On the Problem of crack extension in brittle solids under general loading,” Mechanics Today, edited by S. Nemat-Nasser, Pergamon Press, New York (1978), pp. 87–148.Google Scholar
  13. 13.
    De-Chang Tian, Dan-Quan Lu, and Jia-Ju Zhu, “Crack propagation under combined stresses in three-dimensional medium,” Eng. Fract. Mech.,16, No. 1, 5–17 (1982).Google Scholar
  14. 14.
    G. D. Del', A. S. Solyanik, and B. P. Chebaevskii, “Determination of limiting loads for a body with a crack according to criteria of resistance of materials,” Fiz. Khim. Mekh. Mater., No. 4, 90–93 (1977).Google Scholar
  15. 15.
    H. C. Wu, “Dual failure criterion for plain concrete,” J. Eng. Mech. Div. Am. Soc. Civ. Eng.,100, 1167–1181 (1974).Google Scholar
  16. 16.
    A. A. Griffith, “The phenomenon of rupture and flow in solids,” Phil. Trans. R. Soc. A.221, No. 1, 163–198 (1920).Google Scholar
  17. 17.
    V. I. Mossakovskii and M. T. Rybka, “Construction of a theory of strength of brittle materials based on Griffith's energy considerations,” Prikl. Mat. Mekh.,29, No. 2, 291–296 (1968).Google Scholar
  18. 18.
    V. V. Dudukalenko and N. B. Romalis, “Direction of growth of a crack under conditions of plane stressed state,” Mekh. Tverd. Tela,8, No. 2, 129–136 (1973).Google Scholar
  19. 19.
    N. B. Romalis, “Local criteria for fracture in the case of external loads which are unsymmetrical relative to the crack,” Prikl. Mekh., No. 12, 120–123 (1979).Google Scholar
  20. 20.
    M. A. Hussain, S. L. Pu, and J. Underwood, “Strain energy release rate for a crack under combined mode I and mode II,” Fracture Analysis, ASTM STP 560, ASTM, Philadelphia (1974), pp. 2–28.Google Scholar
  21. 21.
    B. A. Bilby and G. E. Cardew, “The crack with a kinked tip,” Int. J. Fract.,11, No. 4, 708–712 (1975).Google Scholar
  22. 22.
    C.-H. Wu, “Maximum-energy-release-rate criterion applied to a tension-compression specimen with crack,” J. Elast.,8, No. 3, 235–257 (1978).Google Scholar
  23. 23.
    C.-H Wu, “Fracture under combined loads by maximum-energy-release-rate criterion,” Trans. ASME E,45, No. 3, 553–558 (1978).Google Scholar
  24. 24.
    K. C. Hwang, D. H. Hua, and I. W. Yu, “On the maximum-energy-release-rate criterion for fracture under combined loads,” in: Advances in Fracture Research, D. Fraçois (ed.), Pergamon Press, Oxford (1981), pp. 123–130.Google Scholar
  25. 25.
    M. Amestoy, H. D. Bui, and K. Dang-Van, “Analytic asymptotic solution of the kinked crack problem,” ibid., pp. 107–113.Google Scholar
  26. 26.
    K. K. Lo, “Analysis of branched cracks,” Trans. ASME E,45, No. 4, 757–802 (1978).Google Scholar
  27. 27.
    S. B. Batdorf, “Comparison of the best known fracture criteria,” Proceedings of the International Symposium on Absorbed Spec. Energy and Strain Energy Density Criterion (Budapest, September 17–19, 1980), Budapest (1982), pp. 243–250.Google Scholar
  28. 28.
    G. C. Sih, “A special theory of crack propagation” in: Mechanics of Fracture. 1. Methods of Analysis and Solution of Crack Problems, Noordhoff International, Leyden (1973), pp. XXI-XLV.Google Scholar
  29. 29.
    G. C. Sih, “Strain-energy-density factor applied to mixed mode crack problems,” Int. J. Fract.,10, No. 3, 305–322 (1974).Google Scholar
  30. 30.
    G. C. Sih and B. C. Cha, “A fracture criterion for three-dimensional crack problems,” Eng. Fract. Mech.,6, No. 4, 699–723 (1974).Google Scholar
  31. 31.
    J. L. Swedlow, “Criteria for growth of the angled crack,” in: Cracks and Fracture, ASTM STP 601, ASTM, Philadelphia (1976), pp. 506–521.Google Scholar
  32. 32.
    L. T. Berezhnitskii and R. S. Gromyak, “Estimation of the limiting state of a matrix in the vicinity of a rigid inclusion with a sharp tip,” Fiz. Khim. Mekh. Mater., No. 2, 39–47 (1977).Google Scholar
  33. 33.
    B.-Y. Yu, “Fracture criterion of deviator stress tensor factor,” Eng. Fract. Mech.,16, No. 1, 143 (1982).Google Scholar
  34. 34.
    P. S. Theocaris and N. P. Andrianopoulos, “A modified strain-energy-density criterion applied to crack propagation,” Trans. ASME E,49, No. 1, 81–86 (1982).Google Scholar
  35. 35.
    B.-Y. Yu, “A discussion on the mixed mode J-integral fracture criterion,” Eng. Fract. Mech.,16, No. 1, 156 (1982).Google Scholar
  36. 36.
    J. Tirosh, “Incipient fracture angle, fracture loci and critical stress for mixed mode loading,” Eng. Fract. Mech.,9, No. 3, 607–616 (1977).Google Scholar
  37. 37.
    G. S. Pisarenko and A. A. Lebedev, Resistance of Materials to Strain and Fracture in a Complex Stressed State [in Russian], Naukova Dumka, Kiev (1969).Google Scholar
  38. 38.
    F. A. McClintock, “A discussion on crack extension in plates under plane loading and transverse shear,” by F. Érdogan and G. C. Sih,” Trans. ASME D, 85, No. 4, 525–527 (1963).Google Scholar
  39. 39.
    I. Finnie and A. Saith, “A note on angled crack problem and the directional stability of cracks,” Int. J. Fract., 9, No. 4, 484–486 (1973).Google Scholar
  40. 40.
    J. Eftis and N. Subramonian, “The inclined crack under biaxial load,” Eng. Fract. Mech.,10, No. 1, 43–47 (1978).Google Scholar
  41. 41.
    J. Eftis, N. Subramonian, and H. Liebowitz, “Crack border stress and displacement equations revisited,” Eng. Fract. Mech.,9, No. 1, 189–210 (1977).Google Scholar
  42. 42.
    J. G. Williams and P. D. Ewing, “Fracture under complex stress. The angled crack problem,” Int. J. Fract. Mech.,8, No. 4, 445–446 (1972).Google Scholar
  43. 43.
    P. D. Ewing and J. G. Williams, “The fracture of spherical shells under pressure and circular tubes with angled cracks in torsion,” Int. J. Fract.,10, No. 4, 537–544 (1974).Google Scholar
  44. 44.
    K. J. Chang, “On the maximum strain criterion — a new approach to the angled crack problem,” Eng. Fract. Mech.,14, No. 1, 107–124 (1981).Google Scholar
  45. 45.
    K. J. Chang, “Further studies of the maximum stress criterion on the angled crack problem,” Eng. Fract. Mech.,14, No. 1, 125–142 (1981).Google Scholar
  46. 46.
    P. S. Theocaris and N. P. Andrianopoulos, “The von Mises elastic-plastic boundary as the core region in fracture criteria,” Eng. Fract. Mech.,16, No. 3, 425–432 (1982).Google Scholar
  47. 47.
    S. K. Maiti and R. A. Smith, “Criteria for mixed mode brittle fracture based on the preinstability stress-strain field. P. I: Slit and elliptical cracks under uniaxial tension,” Int. J. Fract.,23, No. 4, 281–295 (1983).Google Scholar
  48. 48.
    S. K. Maiti and R. A. Smith, “Criteria for mixed mode brittle fracture based on the preinstability stress-strain field. P. II: Pure shear and uniaxial compressive loading,” Int. J. Fract.,24, No. 1, 5–22 (1984).Google Scholar
  49. 49.
    S. K. Maiti and R. A. Smith, “Criteria for brittle fracture in biaxial tension,” Eng. Fract. Mech.,19, No. 5, 793–804 (1984).Google Scholar
  50. 50.
    A. E. Andreikiv, Three-Dimensional Problems in the Theory of Cracks [in Russian], Naukova Dumka, Kiev (1982).Google Scholar
  51. 51.
    C.-T. Chou and C.-P. Kuo, “An analysis of the mixed-type stress field near a crack-tip region,” Eng. Fract. Mech.,16, No. 1, 35–46 (1982).Google Scholar
  52. 52.
    M. Ya. Leonov and K. M. Rusinko, “Macroscopic theory of brittle fracture,” Dokl. Akad. Nauk URSR, No. 12, 1582–1585 (1961).Google Scholar
  53. 53.
    P. A. Pavlov and S. Zhunisbekov, “Study of the initial state of development of a crack during stretching and compression of PMMA samples,” Probl. Prochn., No. 8, 14–18 (1973).Google Scholar
  54. 54.
    L. P. Pook, “The effect of crack angle on fracture toughness,” Eng. Fract. Mech.,3, No. 3, 205–218 (1971).Google Scholar
  55. 55.
    R. C. Shah, “Fracture under combined modes in 4340 steel,” in: Fracture Analysis, ASTM STP 560, ASTM, Philadelphia (1974), pp. 29–52.Google Scholar
  56. 56.
    G. Ueda, “Brittle fracture initiation characteristics under biaxial loading,” in: Advances in Research on the Strength and Fracture of Materials, Vol. 2, M. R. Taplin (ed.), Waterloo (1977), pp. 135–154.Google Scholar
  57. 57.
    S. Ya. Yarema, G. S. Ivanitskaya, A. L. Maistrenko, and A. I. Zboromirskii, “Development of a crack in a solid alloy with combined mode I and II strains,” Probl. Prochn., No. 8, 51–56 (1984).Google Scholar
  58. 58.
    H. Awaji and S. Sato, “Combined mode fracture toughness measurement by the disk test,” Trans. ASME J.100, No. 9, 175–182 (1978).Google Scholar
  59. 59.
    G. S. Pisarenko and V. P. Naumenko, “Experimental methods in the mechanics of fracture of materials,” Fiz. Khim. Mekh. Mater., No. 2, 28–40 (1982).Google Scholar
  60. 60.
    A. F. Liu, “Crack growth and failure of aluminum plate under inplane shear,” AIAA J.,12, No. 2, 180–185 (1974).Google Scholar
  61. 61.
    A. A. Chizhik, “Fracture resistance of materials used in machine building under conditions of longitudinal shear,” New Methods in the Evaluation of the Functional Properties of Materials and Welded Connections in Power-Generating Equipment, Tr. TsKTI, No. 177, 3–17 (1980).Google Scholar

Copyright information

© Plenum Publishing Corporation 1986

Authors and Affiliations

  • S. Ya. Yarema
    • 1
  • G. S. Ivanitskaya
    • 1
  1. 1.G. V. Karpenko Physicomechanics InstituteAcademy of Sciences of the Ukrainian SSRLvov

Personalised recommendations