References
S. J. SAVAGE and F. H. FROES,J. Metals 36 (4) (1984) 20–33.
H. JONES,Mater. Sci. Eng. 65 (1984) 145.
F. H. FROES and R. G. ROWE, “Rapidly Solidified Alloys and Their Mechanical and Magnetic Properties”, edited by B. C. Giessen, D. E. Polk and A. I. Taub (Materials Research Society, Pittsburgh, Pennsylvania, 1986), Vol. 58, p. 309.
“Titanium, Rapid Solidification Technology”, edited by F. H. Froes and D. Eylon (The Metallurgical Society, Warrendale, Pennsylvania, 1986).
S. KRISHNAMURTHY, R. G. VOGT, D. EYLON and F. H. FROES, “Rapidly Solidified Metastable Materials”, edited by B. H. Kear and B. C. Giesen (Elsevier Science, New York, 1984), Vol. 28, p. 361.
S. H. WHANG and B. C. GIESSEN, “Rapid Solidification Processing: Principles and Technologies, III”, edited by R. Mehrabian (National Bureau of Standards, Washington, DC, 1982) p. 439.
T. Z. KATTAMIS, W. F. BROWER and R. MEHRABIAN,J. Cryst. Growth 19 (1973) 229.
T. Z. KATTAMIS, Y. V. MURTY and J. A. REFFNER, ibid.19 (1973) 237.
J. W. HLINKA and V. PASCHKIS,Trans. ASM 51 (1959) 353.
H. A. DAVIES, N. SHOHOJI and D. H. WARRINGTON, “Rapid Solidification Processing: Principles and Technologies, II”, edited by R. Mehrabianet al. (Claitor's Publishing Division, Baton Rouge, Louisiana, 1980) p. 153.
H. A. DAVIES, “Rapidly Quenched Metals”, edited by S. Steeb and H. Warlimont (Elsevier Science, Amsterdam, 1985), Vol. I, p. 101.
R. ICHIKAWA, H. TANIGUCHI, and O. ASIA,Z. Metallkde 71 (1980) 260.
K. MURAKAMI, T. FUJIYAMA, A. KOIKE and T. OKAMOTO,Acta metall. 31 (1983) 1425.
K. MURAKAMI, H. AIHARA and T. OKAMOTO, ibid.32 (1984) 933.
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Krishnamurthy, S., Jones, H. & Froes, F.H. Solidification microstructures of hammer and anvil splat-quenched binary titanium alloys. J Mater Sci Lett 7, 1138–1141 (1988). https://doi.org/10.1007/BF00720858
Received:
Accepted:
Issue Date:
DOI: https://doi.org/10.1007/BF00720858