Improving the method of determination of the specific work for failure
These keywords were added by machine and not by the authors. This process is experimental and the keywords may be updated as the learning algorithm improves.
Unable to display preview. Download preview PDF.
- 1.B. A. Drozdovskii and Ya. B. Fridman, “A method of determining the sensitivity of materials to cracks,” Zavod. Lab., No. 5, 579–590 (1955).Google Scholar
- 2.B. A. Drozdovskii and Ya. B. Fridman, “A method of determining sensitivity to cracks in impact bending,” Zavod. Lab., No. 3, 320–328 (1959).Google Scholar
- 3.N. N. Davidenkov, Dynamic Tests of Metals [in Russian], Otd. Nauch.-Tekh. Inf. Glavn. Red. Lit. po Chern. Met., Moscow (1936).Google Scholar
- 4.K. Hartbauer, “Materials sensitive to slow deformation,” in: Impact Tests of Metals [Russian translation], Mir, Moscow (1973), pp. 16–23.Google Scholar
- 5.L. V. Prokhodtseva and B. A. Drozdovskii, “The necessity of determining the fracture characteristics of titanium alloys under static and impact loading,” Zavod. Lab., No, 9, 1122–1127 (1975).Google Scholar
- 6.I. L. Shimelevich, “The influence of loading rigidity in static bend testing of samples with a notch on the form of the load vs deflection curve,” in: Metal Science [in Russian], Sudpromgiz, Leningrad (1957), pp. 70–78.Google Scholar
- 7.B. A. Drozdovskii and Ya. B. Fridman, The Influence of a Crack on the Mechanical Properties of Constructional Steels [in Russian], Metallurgizdat, Moscow (1960).Google Scholar
- 8.J. E. Srawley, “Wide range stress intensity factor expressions for ASTM E-399 standard fracture toughness specimens,” Int. J. Fract.,12, No. 3, 475–476 (1976).Google Scholar
- 9.H. P. Keller and D. Münz, “Comparison of different equations for calculation of J-integral from one load-displacement curve for three point specimens,” Int. J. Fract.,12 No. 6, 780–784 (1976).Google Scholar
© Plenum Publishing Corporation 1984