References
J. R. DARBY and J. K. SEARS, “Plasticizers” in Encyclopedia of Polymer Science and Technology (John Wiley and Sons, New York, 1969) p. 228.
D. KNIBBE,Plastica 24 (1971) 358.
E. KAMPOURIS,Eur. Pol. J. 11 (1975) 705.
Polym. Eng. Sci. 16 (1976) 59.
E. KAMPOURISet al., Polymer 16 (1975) 840.
H. P. SCHREIBERet al., in “Plasma Polymerisation” (American Chemical Soc., Washington DC, 1979).
I. MELLAN, “Industrial Plasticizers” (Pergamon Press, New York, 1963) p. 39.
M. MORTON, “Rubber Technology” (Van Nostrand Reinhold Co, New York, 1973) p. 46.
P. BRUINS, “Plasticizer Technology”, Vol. 1 (Reinhold Publication Corporation, New York, 1965) p. 222.
“1977 Annual Book of the ASTM Standards”, Part 35 (American Soc. for Testing Materials, Easton, 1977) p. 674–77.
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Andreopoulos, A.G. Plasticization of acrylic resins. J Mater Sci Lett 4, 293–295 (1985). https://doi.org/10.1007/BF00719794
Received:
Accepted:
Issue Date:
DOI: https://doi.org/10.1007/BF00719794