Conclusions
-
1.
It is shown that a continuous plant can be used to manufacture TsIATIM-201 grease from a soap-oil dispersion with stiffener content 12%.
-
2.
It has been established that the properties of the grease are greatly affected by the alkali content, the discharge temperature of the fused system from the heater, and the homogenization conditions. It is shown that the manufacture of greases meeting GOST requirements requires strict control.
Similar content being viewed by others
Literature cited
G. Keil, H. Roth, E. Boeck, and R. Stöffgen, Freiberger Forschung., No. 367 (1965), p. 47.
H. Raich, E. Armstrong, and B. Peterson, NLGI Spokesman,28, No. 5 (1964), p. 136.
C. J. Boner, Manufacture and Use of Lubricating Greases [Russian translation], Gostoptekhizdat (1958).
Collection: Improving the Technology of Grease Manufacture [in Russian], GOSINTI (1961).
Author information
Authors and Affiliations
Additional information
Translated from Khimiya i Tekhnologiya Topliv i Masel, No. 5, pp. 20–23, May, 1968.
Rights and permissions
About this article
Cite this article
Smiotkano, E.A., Vinner, G.G., Vainshtok, V.V. et al. Continuous manufacture of lithium lubricating greases. Chem Technol Fuels Oils 4, 340–343 (1968). https://doi.org/10.1007/BF00718203
Issue Date:
DOI: https://doi.org/10.1007/BF00718203