Influence of thermal deformation processes in welding on the fracture toughness of a weld joint of 14G2SAF steel
- 40 Downloads
KeywordsWelding Fracture Toughness Deformation Process Weld Joint Thermal Deformation
These keywords were added by machine and not by the authors. This process is experimental and the keywords may be updated as the learning algorithm improves.
Unable to display preview. Download preview PDF.
- 1.A. P. Ammosov, L. V. Moskvitina, V. P. Larionov, et al., “Thermal cycles and transformations of austenite in the area of overheating of 14G2SAF and 14Kh2GMR steels under conditions of welding at low temperatures,” Avtomat. Svarka, No. 6, 16–20 (1984).Google Scholar
- 2.A. P. Ammosov, A. M. Zhirkov, and D. D. Kipriyanova, “An instrument for recording the parameters of the fracture process in impact tests,” in: Scientific and Technical Information Bulletin [in Russian], Yakutsk. Fil. Sib. Otd. Akad. Nauk SSSR, Yakutsk (1983), pp. 26–28.Google Scholar
- 3.O. A. Bakshi, A. N. Manoshkov, and L. G. Kukin, “A method of determination of the constituents of impact strength,” Zavod. Lab., No. 5, 612–615 (1969).Google Scholar
- 4.V. F. Bulanenko and M. V. Pirusskii, “Separation of impact strength into its constituents by recording the oscillogram to force-time coordinates,” Zavod. Lab., No. 6, 750–751 (1972).Google Scholar
- 5.V. F. Bulanenko and M. V. Pirusskii, “The temperature-rate relationship of the dynamic brittle crack propagation resistance,” Zavod. Lab., No. 4, 91–95 (1981).Google Scholar
© Plenum Publishing Corporation 1987