Calculation of the fatigue limits of smooth and notched specimens

  • G. M. Khazhinskii


Fatigue Fatigue Limit 
These keywords were added by machine and not by the authors. This process is experimental and the keywords may be updated as the learning algorithm improves.


Unable to display preview. Download preview PDF.

Unable to display preview. Download preview PDF.

Literature cited

  1. 1.
    J. K. Musuva and J. C. Radon, “Fatigue crack growth at low stress intensities,” in: Materials, Experimentation, and Design in Fatigue, Warweek (1981), pp. 106–116.Google Scholar
  2. 2.
    A. Outsuka, K. Mori, S. Tsuyama, and Y. Sumiya, “Fatigue crack growth and threshold under mode II loading,” in: Proceedings of the International Conference on Analytical and Experimental Fracture Mechanics (Rome, June 23–27, 1980), Rockville, Md. and Alphen van de Rijn (1981), pp. 375–386.Google Scholar
  3. 3.
    G. Hua, M. W. Brown, and K. J. Miller, “Mixed mode fatigue thresholds,” Fatigue Eng. Mater. Struct.,5, No. 1, 1–17 (1982).Google Scholar
  4. 4.
    G. M. Khazhinskii, “Calculation of stress raisers in elastoplastic deformation,” in: Calculations for Strength [in Russian], No. 24, Mashinostroenie, Moscow (1983), pp. 102–112.Google Scholar
  5. 5.
    G. M. Khazhinskii, “A criterion for evaluation of the strength of piping under cyclic loading,” in: Scientific Works on “Investigation of the Assembly of Piping and Tanks” [in Russian], Vsesoyuz, Nauch.-Issled. Inst. Montazh. Spets. Stroi. Rabot., Moscow (1984), pp. 46–55.Google Scholar
  6. 6.
    El-Haddad, Smith, and Topper, “The propagation of short fatigue cracks,” Tr. Am. Obshch. Inzh. Mekh. Teoret. Osn. Inzh. Rashetov, No. 1, 43–47 (1979).Google Scholar
  7. 7.
    L. I. Slepyan and L. V. Troyankina, “A theory of crack growth under cyclic loads,” Izv. Akad. Nauk SSSR, Mekh. Tverd. Terla, No. 5, 113–126 (1983).Google Scholar
  8. 8.
    S. Usami and S. Kusumoto, Effects of Crack Length and Stress Ratio on the Fatigue Limit of Mild Steel Plate and of Welded Joint, IIW Doc. XIII-832-77, S. 1, Hitachi (1977).Google Scholar
  9. 9.
    P. Forrest, The Fatigue of Metals [in Russian], Mashinostroenie, Moscow (1968).Google Scholar
  10. 10.
    V. T. Troshchenko, The Deformation and Failure of Metals in Multicycle Loading [in Russian], Naukova Dumka, Kiev (1981).Google Scholar
  11. 11.
    G. M. Khazhinskii, “Calculation of the scale factors and surface quality in fatigue,” Izv. Vyssh. Uchebn. Zaved., Mashinostronie, No. 8, 3–7 (1983).Google Scholar
  12. 12.
    R. B. Khéivud, Design Taking Fatigue into Consideration [in Russian], Mashinostroenie, Moscow (1969).Google Scholar

Copyright information

© Plenum Publishing Corporation 1987

Authors and Affiliations

  • G. M. Khazhinskii
    • 1
  1. 1.All-Union Scientific-Research Institute for Assembly and Special Structural WorkMoscow

Personalised recommendations