Literature cited
O. N. Romaniv, The Fracture Toughness of Constructional Steels [in Russian], Metalluygiya, Moscow (1979).
L. I. Tushinskii, The Hardening of Rail Steel [in Russian], Novosibilrsk (1966).
L. I. Tushinskii and L. B. Tikhomirova, “Structural aspects of increasing the design strength of alloys,” Fiz.-Khim. Mekh. Mater., No. 5, 10–23 (1975).
L. I. Tushinskii, “New means of creation of the optimum structure of alloys,” in: New Methods of Strengthening and Working of Metals [in Russian], Novosibirsk (1981), pp. 3–189.
L. I. Tushinskii (ed.), The Structure and Design Strength of Steel: An Interuniversity Collection of Scientific Works [in Russian], Novosibirsk (1974).
L. I. Tushinskii (ed.), The Structure and Design Strength of Steel: An Interuniversity Collection of Scientific Works [in Russian], Novosibirsk (1976).
L. K. Gordienko, Substructural Strengthening of Metals and Alloys [in Russian], Nauka, Moscow (1973).
I. L. Bernshtein, The Strength of Steel [in Russian], Metallurgiya, Moscow (1974).
G. I. Terebilo, L. B. Tikhomirova, and L. I. Tushinskii, “The change in substructure of bainite in thermomechanical hardening,” Metalloved. Term. Obrab. Met., No. 2, 66–68 (1977).
L. I. Tushinskii and L. B. Tikhomirova, “Thermomechanical working of carbon steel,” Metalloved. Term. Obrab. Met., No. 2, 42–44 (1972).
L. I. Tushinskii, Yu. V. Kalloida, and L. B. Tikhomirova, “Increasing the design strength of carbon steel by high-temperature thermomechanical working with isothermal decomposition of austenite,” Metalloved. Term. Obrab. Met., No. 2, 58–59 (1977).
L. I. Tushinskii, A. O. Tokarev, “Controlled thermoplastic strengthening of low-carbon steel,” in: The Optimum Structure of Steel for Increasing Design Strength [in Russian], Novosibirsk (1983), pp. 3–10.
L. I. Tushinskii, A. O. Tokarev, and V. S. Vlasov, “The creation of the optimum structure and design strength of carbon steel by controlled thermoplastic working,” in: New Methods of Strengthening and Working of Metals [in Russian], Novosibirsk (1979).
L. B. Tikhomirov, A. A. Bataev, and V. M. Potapov, “The influence of the conditions of transformation of the austenite of U8 steel on the controlled thermoplastic strengthening effect,” in: The Optimum Structure of Steel for Increasing Design Strength [in Russian], Novosibirsk (1983), pp. 23–26.
L. I. Tushinskii and L. B. Tikhomirov, “Promising means of increasing the strength of steel,” in: The Structure and Design Strength of Steel [in Russian], Novosibirsk (1974).
Yu. Ya. Meshkov, Physical Fundamentals of the Fracture of Steel Structures [in Russian], Naukova Dumka, Kiev (1981).
V. N. Gridnev, V. G. Gavrilyuk, and Yu. Ya. Meshkov, The Strength and Plasticity of Cold Deformed Steel [in Russian], Naukova Dumka, Kiev (1974).
L. I. Tushinskii, V. A. Bataev, and A. A. Bataev, “Controlled thermoplastic strengthening of steel with isothermal transformation,” in: Modern Equipment and Methods for Heat and Chemicothermal Treatment of Metallic Materials [in Russian], Mosk. Dom. Nauch. Tekh. Prop., Moscow (1986), pp. 119–122.
V. M. Potapov and E. N. Mironov, “The mechanical properties of U8 steel with a bainitic structure after controlled thermoplastic strengthening,” in: The Optimum Structure of Steel for Increasing the Design Strength [in Russian], Novosibirsk (1983), pp. 15–23.
Author information
Authors and Affiliations
Additional information
Translated from Fiziko-Khimicheskaya Mekhanika Materialov, Vol. 23, No. 2, pp. 30–37, March–April, 1987.
Rights and permissions
About this article
Cite this article
Tushinskii, L.I. The optimum structures of alloys with high strength and crack resistance. Soviet Materials Science 23, 135–141 (1987). https://doi.org/10.1007/BF00718132
Received:
Issue Date:
DOI: https://doi.org/10.1007/BF00718132