Conclusions
-
1.
During isothermal soaking there is precipitation and then coalescence of strengthening γ′-phase from alloy KhN62BMKTYu supersaturated solid solution. The curve for isothermal decomposition of supersaturated solid solution has an S-shaped form. The kinetics for γ'-phase particle growth are described by the equation d = kτ1/3, where k is growth rate coefficient, τ is soaking time.
-
2.
Loss of strength for alloy KhN62BMKTYu commences at 800°C.
Similar content being viewed by others
Literature cited
V. P. Zryumov, A. Ya. Shinyaev, and B. I. Golovko, "Effect of strengthening γ'-phase size and distribution on the operating properties of alloy ÉI698-VD", Tekhnol. Legkikh Splavov, No. 1, 32–36 (1983).
V. P. Zryumov, "Effect of basic heat-treatment parameters on the formation of the intragranular structure for alloy ÉP742", Tekhnol. Legkikh Splavov, No. 8, 56–63 (1982).
M. Z. Pertsovskii, O. S. Korobov, R. G. Rybalov, et al., "Study of aging kinetics for high-temperature alloy ÉI698", Tekhnol. Legkikh Splavov, No. 9, 52–56 (1975).
A. Kelly and R. Nicholson, Dispersion Hardening [in Russian], Metallurgiya, Moscow (1968).
Additional information
Translated from Metallovedenie i Termicheskaya Obrabotka Metallov, No. 2, pp. 37–39, February, 1986.
Rights and permissions
About this article
Cite this article
Zryumov, V.P., Shinyaev, A.Y. Kinetics of isothermal decomposition for supersaturated solid solution of alloy KhN62BMKTYu. Met Sci Heat Treat 28, 127–130 (1986). https://doi.org/10.1007/BF00717534
Issue Date:
DOI: https://doi.org/10.1007/BF00717534