This is a preview of subscription content, log in via an institution to check access.
Literature cited
A. A. Griffith, “Theory of rupture,” Proceedings of the First International Congress on Applied Mechanics, Delft (1924), pp. 55–63.
V. I. Mossakovskii and M. T. Rybka, “An attempt to construct a theory of strength for brittle materials bassed on the energy considerations of Griffith,” Prikl. Mat. Mekh.,29, No. 2, 291–296 (1965).
V. V. Panasyuk, Limiting Equilibrium of Brittle Solids with Cracks, [in Russian], Naukova Dumka, Kiev (1968).
A. A. Katinskii and N. S. Sailov, “Construction of curves for ultimate stresses for a brittle solid weakened by an elliptical opening with cracks at the boundary,” Fiz.-Khim. Mekh. Mat., No. 1, 98–101 (1978).
N. N. Davidenkov and A. N. Stravrogin, “Strength criteria for brittle failure and the plane stress state,” Izv. Akad. Nauk SSSR, Otd. Tekh. Nauk, No. 8, 101–109 (1954).
V. V. Panasyuk, L. T. Berezhnitskii, and S. E. Kovchik, “Development of an arbitrarily oriented linear crack during extension of a plate,” Prikl. Mekh.,1, No. 2, 48–55 (1965).
F. Erdogan and G. C. Sih, “On the crack extension in plates under plane loading and transverse shear,” Trans. ASME,D85, No. 4, 519–525 (1963).
G. R. Irwin, “Analysis of stresses and strains near the end of a crack traversing a plate,” Trans. ASME,E79, No. 24, 361–364 (1957).
M. A. Hussain, S. L. Pu, and J. Underwood, “Strain energy release rate for a crack under combined mode I and mode II,” Fracture Analysis, ASTM STP560, ASTM, Philadephia (1974), pp. 2–28.
G. C. Sih, “A special theory of a crack propagation,” in: Mechanics of Fracture 1-Methods of Analysis and Solutions of Crack Problems, Nordhoff, Int. Publ., Leyden (1973), pp. XXI-XLV.
G. C. Sih, “A three-dimensional strain energy density factor theory of crack propagation,” In: Mechanics of Fracture Three-Dimensional Crack Problems, Nordhoff, Int. Publ., Leyden (1975), pp. XV-LIII.
L. A. Kopel'man, Resistance of Welded Joints to Brittle Failure [in Russian], Mashinostroenie (1978).
G. P. Karzov, Methods of Evaluating the Resistance to Brittle Failure of Welded Pressure Containers, [in Russian], LDNTP, Leningrad (1974).
A. A. Chizhik, “Calculation of the stress-intensity factors in helical rods suitable for the evaluating the carrying capacity of reinforcing elements of nuclear power stations,” Trans. TSKTI, Issue 130, 95–120 (1974).
A. A. Chizhik, “Local criteria for failure with the presence of cracks in a complex stress condition,” Énergomashinostroenie, No. 10, 31–34 (1975).
A. F. Ioffe, “Mechanical properties of crystals,” Usp. Fiz. Nauk,8, No. 4, 441–482 (1928).
N. N. Davidenkov, Dynamic Testing of Metals [in Russian], ONTI, Moscow-Leningrad (1936).
J. E. Srawley and W. F. Brown, Plane Strain Crack Toughness Testing of High-Strength Metallic Materials, ASTM, Philadelphia (1966).
J. Rice, “Stresses due to a sharp notch in a strain-hardening elastoplastic material under longitudinal shear,” Prikl. Mekh., Series E,34, pp. 82–46 [sic] (1967).
N. A. Makhutov, Resistance of Structural Elements to Brittle Failure [in Russian], Mashinostroenie, Moscow (1973).
Author information
Authors and Affiliations
Additional information
Translated from Fiziko-Khimicheskaya Mechanika Materialov, Vol. 15, No. 2, pp. 5–10, March–April, 1979.
Rights and permissions
About this article
Cite this article
Chizhik, A.A. Fracture dimorphism in local areas of solids with cracks. Mater Sci 15, 95–100 (1979). https://doi.org/10.1007/BF00716239
Received:
Issue Date:
DOI: https://doi.org/10.1007/BF00716239