Literature cited
H. Liebowitz (ed.), Fracture [Russian translation], Vol. 6, The Fracture of Metals, Metallurgiya, Moscow (1976).
O. N. Romaniv, The Fracture Toughness of Constructional steels [in Russian], Metallurgiya, Moscow (1979).
D. Teplin (ed.), Fracture Mechanics. The Fracture of a Structure [Russian translation], R. V. Gol'dshtein (ed.), Mir, Moscow (1980).
B. A. Kolachev and A. V. Mal'kov, Physical Fundamentals of the Fracture of Titanium [in Russian], Metallurgiya, Moscow (1983).
Yu. P. Solntsev and G. A. Stepanov, Materials in Cryogenic Technology (Handbook) [in Russian], Mashinostroenie, Leningrad (1982).
E. A. Ul'yanin and N. A. Sorokina, Steels and Alloys for Cryogenic Technology (Handbook) [in Russian], Metallurgiya, Moscow (1984).
V. S. Zolotorevskii, The Mechanical Properties of Metals [in Russian], Metallurgiya, Moscow (1983).
V. B. Shepilov, V. V. Proskurin, I. A. Ryzhkov, and V. I. Kholodnyi, "Features of the plastic deformation of maraging steels at cryogenic temperatures," in: Phase Transformations in Solids [in Russian], Voronezh. Politekh. Inst. (1982), pp. 92–98.
M. L. Bernshtein (ed.) The Fracture Toughness of High Strength Materials [Russian translation], Metallurgiya, Moscow (1973).
Additional information
Voronezh Polytechnic Institute. Translated from Metallovedenie i Termicheskaya Obrabotka Metallov, No. 6, pp. 59–62, June, 1987.
Rights and permissions
About this article
Cite this article
Shepilov, V.B., Proskurin, V.V. & Mikhailov, A.V. Influence of the temperature and rate conditions of deformation on the failure characteristics of corrosion-resistant steels. Met Sci Heat Treat 29, 472–476 (1987). https://doi.org/10.1007/BF00715887
Issue Date:
DOI: https://doi.org/10.1007/BF00715887