Conclusions
-
1.
Embrittlement of steel VNS-2 with low content of residual austenite (3–5%) is due to the segregation of a large amount of particles of ɛ-phase about 7 nm in size during aging by the standard regime; these particles rigidly lock dislocations.
-
2.
Maximal strengthening of steel VNS-2 not accompanied by its embrittlement is attained when particles 10 nm in size are segregated in the process of aging at 460–480°C 1–3h. Longer holding at these temperatures leads to overaging of the steel and impairment of the strength properties.
Similar content being viewed by others
Literature cited
Yu. F. Orzhekhovskii, S. R. Birman, and Ya. M. Potak, "Properties of stainless maraging steel 08Kh15N5D2T", Stal', No. 6, 545–547 (1972).
Ya. M. Potak, High-Strength Steels [in Russian], Metallurgiya, Moscow (1972).
O. L. Bendryshev, V. V. Alekseev, and V. I. Silina, "Special technological features of the maraging steels VNS-2 and ÉP817", Metalloved. Term. Obrab. Met., No. 1, 48–50 (1984).
S. P. Birman, Economically Alloyed Maraging Steels [in Russian], Metallurgiya, Moscow (1974).
Additional information
Translated from Metallovedenie i Termicheskaya Obrabotka Metallov, No. 4, pp. 14–16, April, 1989.
Rights and permissions
About this article
Cite this article
Zryumov, v.P., Golovko, B.I. & Mazunina, E.V. Embrittlement of steel VNS-2 aging. Met Sci Heat Treat 31, 251–254 (1989). https://doi.org/10.1007/BF00715796
Issue Date:
DOI: https://doi.org/10.1007/BF00715796