Literature cited
G. V. Karpenko, The Strength of Steel in a Corrosive Medium [in Russian], Mashgiz (1963).
L. A. Glikman, The Corrosion-Mechanical Strength of Metals [in Russian], Mashgiz (1955).
V. I. Likhtman, E. D. Shchukin, and P. A. Rebinder, The Physicochemical Mechanics of Metals, Moscow (1962).
S. L. Milichenko, O. G. Bykovskii, and A. G. Aleksandrov, Fiz.-Khim. Mekhanika Mat., No. 1 (1968).
Yu. P. Zobachev and A. V. Vysotskii, in: Trans. Third Internat. Conf. on Corrosion of Metals, Vol. 3, Moscow (1968).
P. D. Novokreshchenov and G. N. Belenov, Fiz.-Khim. Mekhanikov Mat., No. 1 (1967).
A. V. Bobylev, The Corrosion Cracking of Brasses [in Russian], Metallurgizdat (1956).
H. Wiegand and H. H. Piltz, Werkstoffe u. Korrosion, III,15, No. 3 (1964).
A. Thiruvengadam, Trans. Am. Soc. Mech. Eng.,88, No. 3 (1966).
W. D. Robertson and A. S. Teitelman, in: Mechanisms of the Strengthening of Solids [Russian translation], Izd. Metallurgiya (1965), 187.
D. W. Newkirk and D. H. Wernick, The Direct Observation of Defects in Crystals [Russian translation], Metallurgizdat (1964).
Author information
Authors and Affiliations
Additional information
Translated from Fiziko-Khimicheskaya Mekhanika Materialov, Vol. 7, No. 2, pp. 28–32, March–April, 1971.
Rights and permissions
About this article
Cite this article
Bogachev, I.N., Veksler, Y.G. & Karasyuk, Y.A. Effect of the corrosion medium on the cavitation-erosion resistance of brasses. Mater Sci 7, 155–159 (1973). https://doi.org/10.1007/BF00715356
Received:
Issue Date:
DOI: https://doi.org/10.1007/BF00715356