Conclusions
-
1.
To purify Dipol 45 additive it is desirable to use the method of filtration with use of auxiliary substances such as perlite of the above-mentioned grain-size composition.
-
2.
It has been established that filtration of succinimide additive with use of auxiliary substances takes place with gradual obstruction of the pores.
-
3.
It has been shown that there is a relation between the rate of change of resistance of the filtering layer and the quality of the filtrate: the purer the additive, the greater the resistance.
Similar content being viewed by others
Literature cited
USA patent No. 3018291 (1962).
USA patent No. 3202678 (1965).
USA patent No. 3219666 (1963).
USA patent No. 3316117 (1967).
USA patent No. 3284354 (1966).
B. N. Borisoglebskii, Filters for Liquids [in Russian], TsINTIKhlMneftemash (1965).
V. A. Zhuzhikov, Filtration [in Russian], Izd. Khimiya (1968).
P. P. Budnikov et al., in: Structural Materials, Components, and Artefacts [in Russian], Izd. Budivel'nik (1968).
Author information
Authors and Affiliations
Additional information
Translated from Khimiya i Tekhnologiya Topliv i Masel, No. 8, pp. 21–23, August, 1971.
Rights and permissions
About this article
Cite this article
Soroka, A.S., Yampol'skii, N.G., Glavati, O.L. et al. Purification of succinimide additives. Chem Technol Fuels Oils 7, 585–588 (1971). https://doi.org/10.1007/BF00714031
Issue Date:
DOI: https://doi.org/10.1007/BF00714031