Metal Science and Heat Treatment

, Volume 13, Issue 10, pp 805–808 | Cite as

Recrystallization of hot-worked austenite during continuous cooling

  • S. S. Gorelik
  • V. M. Yankovskii
  • Yu. P. Gul'
  • I. S. Khallach
Theory
  • 24 Downloads

Conclusions

  1. 1.

    During continuous cooling of hot-worked austenite primary and secondary recrystallization occur, which can be determined from changes in the austenite grain size.

     
  2. 2.

    The rate at which different stages of the recrystallization process occur depends on the deformation, alloying, and deformation temperature.

     
  3. 3.

    The grain size is most regular through the section of cylinders subjected to deformation and cooling conditions that result in the greatest grain refining.

     
  4. 4.

    The variation in the size and uniformity of austenite grains in the recrystallization process affects the mechanical properties of the steels investigated. The optimal combination of mechanical properties results from complete primary recrystallization with no secondary recrystallization.

     

Keywords

Grain Size Mechanical Property Austenite Recrystallization Optimal Combination 

Preview

Unable to display preview. Download preview PDF.

Unable to display preview. Download preview PDF.

Literature Cited

  1. 1.
    S. S. Gorelik, Recrystallization of Metals and Alloys [in Russian], Metallurgiya, Moscow (1967).Google Scholar
  2. 2.
    M. L. Bernshtein, Thermomechanical Treatment of Metals and Alloys, Vol II [in Russian], Metallurgiya, Moscow (1968).Google Scholar
  3. 3.
    V. P. Severdenko and A. P. Ankut, Izv. Vuzov., Chernaya Metallurgiya, No. 3 (1961).Google Scholar
  4. 4.
    R. Verner, Ferrous Metals, No. 7 [in Russian], Metallurgiya, Moscow (1969).Google Scholar

Copyright information

© Consultants Bureau 1972

Authors and Affiliations

  • S. S. Gorelik
  • V. M. Yankovskii
  • Yu. P. Gul'
  • I. S. Khallach

There are no affiliations available

Personalised recommendations