Conclusions
To improve the service life of boring bars it is necessary to use a combined treatment consisting of hardening of the outer surface and the inner cavity. Bars of steel 55S2 can be induction hardened and the inner channels can be protected with enamels. Bars of steels 30KhGSFA and 28KhGN3M should be carbonitrided, which makes it possible to obtain a hardened layer on the outer surface and in the inner cavity.
Similar content being viewed by others
Additional information
Abakan Branch of the Krasnoyarsk Polytechnic Institute. Translated from Metallovedenie i Termicheskaya Obrabotka Metallov, No. 6, pp. 74–77, June, 1977.
Rights and permissions
About this article
Cite this article
Ermolaev, V.V., Topkaev, A.V. & Morzhakov, A.V. Fatigue life of boring bars. Met Sci Heat Treat 19, 502–506 (1977). https://doi.org/10.1007/BF00713097
Issue Date:
DOI: https://doi.org/10.1007/BF00713097