Literature cited
Heat Treatment in Engineering [in Russian], Mashinostroenie, Moscow (1980).
N. I. Letchford, "Experience with the use of carbon steel for the driven gear wheels of the rear axle of the car GAZ-51," Avtomobil ‘naya Promyshlennost’, No. 9, 36 (1962).
V. F. Lysenko et al., "Production of crosses for the rear differential from structural high-carbon steel," Tekhnol. Avtomobilestr., No. 8 (78), 11 (1980).
K. Z. Shepelyakovskii, Hardening of Machine Parts by Surface Hardening with Induction Heating [in Russian], Mashinostroenie, Moscow (1972).
E. I. Natanzon, "New technological process of heat treatment of driven gears of the rear differential of the car GAZ-51 using new equipment," Avtomobil ‘naya Promyshlennost’, No. 8, 40 (1962).
R. E. Glinder, "Analysis of the cooling regime of a specimen in end-face hardening," in: Research and Development at the Gorki Motor Car Plant, Issue 2, Volgo-Vyatskoe Knizhnoe Izd., Gorki (1977), p. 29.
N. N. Kachanov, The Hardenability of Steel [in Russian], Metallurgiya, Moscow (1964).
Additional information
Translated from Metallovedenie i Termicheskaya Obrabotka Metallov, No. 12, pp. 19–21, December, 1981.
Rights and permissions
About this article
Cite this article
Gliner, R.E. Analysis of the hardenability of steel 58 (55PP). Met Sci Heat Treat 23, 827–831 (1981). https://doi.org/10.1007/BF00712458
Issue Date:
DOI: https://doi.org/10.1007/BF00712458