Conclusions
-
1.
As the result of decomposition of the α solid solution at elevated temperatures or under isothermal conditions there is a nonmonotonic change in the volume of beryllium bronze BrBNT1.9Mg. Depending on the degree and character of decomposition of the α solid solution after aging, residual stresses differing in sign and level occur.
-
2.
Warping of beryllium bronze is greatly affected by the original structure and the stresses. With increasing rolling reductions during cold rolling of quenched beryllium bronze the warping after aging decreases.
Similar content being viewed by others
Literature cited
A. M. Bochvar and A. K. Trapeznikov (editors), Beryllium and Its Alloys [Russian translation], GONTI, Moscow (1931), p. 178.
A. P. Smiryagin, Commercial Nonferrous Metals and Alloys [in Russian], Metallurgizdat, Moscow (1974), p. 226.
H. Tomas, Z. Metallk.,6, No. 1, 136 (1944).
I. A. Birger, Residual Stresses [in Russian], Mashgiz, Moscow (1963), p. 98.
Yu. D. Tyapkin and A. V. Gavrilova, “Aging of alloys”, Metalloved. Term. Obrab. Met., No. 8, 91 (1974).
Zh. P. Pastukhova and N. V. Vasil'ev, “Deformation and residual stresses during heat treatment and thermomechanical treatment of beryllium bronze,” in: Steels and Alloys in Instrument and Precision Machine Construction [in Russian], MDNTP (1975), p. 146.
Additional information
N. É. Bauman Moscow Technical Cellege. Translated from Metallovedenie i Termicheskaya Obrabotka Metallov, No. 9, pp. 49–51, September, 1979.
Rights and permissions
About this article
Cite this article
Pastukhova, Z.P., Vasil'ev, N.V. Volume changes, warping, and residual stresses in beryllium bronze during heat treatment. Met Sci Heat Treat 21, 717–720 (1979). https://doi.org/10.1007/BF00708640
Issue Date:
DOI: https://doi.org/10.1007/BF00708640