Conclusions
-
1.
Silicon carbide can be used for deoxidation of high-temperature salt baths. It lowers the decarburizing activity and corroding capacity of the fused salts and ensures stable operation of the bath.
-
2.
Silicon carbide should be added in small amounts: 0.12–0.17 wt.% of the salts.
-
3.
It is sufficient to deoxidize the bath with silicon carbidge every 8 h (at the beginning of each shift).
Similar content being viewed by others
Literature cited
E. A. Smol'nikov and F. I. Zhdanova, Salt Baths for Heat Treating Parts [in Russian], Mashgiz, Moscow (1963), p. 74.
E. A. Smol'nikov and F. I. Zhdanova, “Decarburizing and carburizing activity of salt baths with a graphite crucible,” Metalloved. Term. Obrab. Met., No. 9, 2 (1974).
Z. L. Regirer, Liquid Carburizing of Steel [in Russian], Mashgiz, Moscow (1949), p. 11.
Additional information
Tomsk Factory of Cutting Tools. Translated from Metallovedenie i Termicheskaya Obrabotka Metallov, No. 11, pp. 64–65, November, 1976.
Rights and permissions
About this article
Cite this article
Kandalovskii, I.P. Use of silicon carbide as a deoxidizing agent for high-temperature salt baths. Met Sci Heat Treat 18, 992–994 (1976). https://doi.org/10.1007/BF00706915
Issue Date:
DOI: https://doi.org/10.1007/BF00706915