Conclusion
Forgings of steel 60KhN with a section as large as 800 mm can be heated to 1230° for final forging regardless of the subsequent forging reduction ratio. The heat treatment generally used, accompanied by the α→γ transformation, produces grain refining and mechanical properties that meet the specifications.
Similar content being viewed by others
Literature cited
P. V. Sklyuev et al., Optimal Thermomechanical Treatment for Hammer Forging of Structural Steels [in Russian], NIIINFORMTYaZhMASh, Moscow, No. 11-68-3 (1968), p. 36.
V. N. Trubin and I. Ya. Chernikhova, "Thermomechanical conditions of forging structural steels as the final operation", Kuznechno-Shtampovochnoe Proizvod., No. 3, 4 (1973).
I. Ya. Chernikhova et al., Structure and Properties of Pressed Forgings in Relation to Thermomechanical Conditions of Deformation in Final Operation of Forging [in Russian], Ref. Sb. No. 11-76-16, NIIINFORMTYaZhMASh, Moscow (1976), p. 17.
I. Ya. Chernikhova et al., "Optimal thermomechanical treatment for large pieces of structural steel during final forging", in: Production of Large Machines [in Russian], Mashinostroenie, Moscow (1974). p. 19.
V. D. Sadovskii, Structural Inheritance in Steel [in Russian], Metallurgiya, Moscow (1975), p. 205.
I. Ya. Chernikhova et al., "Structural inheritance with heat treatment of forgings of steel 35KhN1M2F", Metalloved. Term. Obrab. Met., No. 2, 21 (1977).
Additional information
S. M. Kirov Ural Polytechnic Institute. South Ural Machine Construction Factory. Translated from Metallovedenie i Termicheskaya Obrabotka Metallov, No. 12, pp. 45–47, December, 1979.
Rights and permissions
About this article
Cite this article
Chernikhova, I.Y., Trubin, V.N., Tepikin, Y.S. et al. Formation of fine-grained structure in forgings of steel 60KhN. Met Sci Heat Treat 21, 948–951 (1979). https://doi.org/10.1007/BF00706637
Issue Date:
DOI: https://doi.org/10.1007/BF00706637