Literature cited
M. V. Beloshapko, I. P. Shmyrev, E. S. Palatnikova, et al., "Special features of the heat treatment of passes for cold pipe rolling mills," in: Pipe Production: Scientific Transaction of the All-Union Scientific, Engineering, and Technical Institute, No. 4, Metallurgiya, Moscow (1975), pp. 25–27.
M. V. Beloshapko, I. P. Shmyrev, E. S. Palatnikova, and V. F. Mazanik, "Choice of steel for making passes for the rolling mill KhPT-450 and determination of the principal parameters of their heat treatment," in: Processes of Treating Pipes: Scientific Transactions of the All-Union Scientific, Engineering, and Technical Institute, No. 3, Metallurgiya, Moscow (1978), pp. 27–30.
M. V. Beloshapko, I. P. Shmyrev, V. F. Mazanik, et al., "Thermal hardening of passes for CPR mills for large sizes," Metallurg, No. 10, 37–38 (1982).
M. V. Beloshapko, I. P. Shmyrev, V. F. Mazanik, et al., "Improving the production technology of passes for cold pipe rolling mills," Stal', No. 9, 63–64 (1983).
I. P. Shmyrev, L. I. Tregubova, S. P. Zhivtsov, and R. N. Goryanaya, "Heat treatment of passes for the rolling mill KhPT90/120," Metalloved. Term. Obrab. Met., No. 2, 49–50 (1986).
I. M. Shmyrev, V. A. Surzhikov, P. D. Mavrodii, et al., "Water-air hardening of passes for cold pipe colling mills," Metalloved. Term. Obrab. Met., No. 7, 42–45 (1976).
P. V. Sklyuev, Hydrogen and Flakes in Large Forgings [in Russian], Mashgiz, Moscow (1963).
P. V. Beloshapko, I. P. Shmyrev, E. S. Palatnikova, et al., "Investigation of the quality of the initial blank for passes of the rolling mill KhPT-450," RZh Metallurgiya, No. 1, 23 (1978).
M. V. Beloshapko, I. P. Shmyrev, V. G. Zimovets, and V. F. Mazanik, "Technological features of the thermal hardening of passes for cold rolling mills for large pipes," in: Processes of Treating Pipes: Scientific Transactions of the All-Union Scientific, Engineering, and Technical Institute, No. 5, Metallurgiya, Moscow (1980), pp. 35–39.
M. V. Beloshapko, I. P. Shamyrev, V. F. Mazanik, et al., "Water-air hardening of passes of steel 9Kh2MF for rolling mills KhPT-250," Metalloved. Term. Obrab. Met., No. 2, 23–25 (1982).
Additional information
All-Union Scientific, Engineering, and Technical Institute, Dnepropetrovsk. Chelyabinsk Pipe Rolling Plant. Translated from Metallovedenie i Termicheskaya Obrabotka Metallov, No. 6, pp. 45–46, June, 1988.
Rights and permissions
About this article
Cite this article
Beloshapko, M.V., Shmyrev, I.P., Mazanik, V.F. et al. Rational production technology of passes for large cold pipe rolling mills. Met Sci Heat Treat 30, 453–455 (1988). https://doi.org/10.1007/BF00704899
Issue Date:
DOI: https://doi.org/10.1007/BF00704899