Literature Cited
M. L. Bernshtein, Strength of Steel [in Russian], Metallurgiya, Moscow (1974), p. 10.
M. M. Snitkovskii et al., "Increase in the resistance of steel by reduction," Metalloved. Term. Obrab. Met., No. 9, 19 (1963).
V. S. Tomsinskii et al., "Thermomechanical treatment of steel R18,", Metalloved. Term. Obrab. Met., No. 7, 63 (1967).
L. F. Lokshin et al., "New developments in thermomechanical treatments of high-speed steels," Metalloved. Term. Obrab. Met., No. 9, 31 (1973).
A. P. Gulyaev and L. M. Sarmanova, "Technological plasticity of high-speed steels," Metalloved. Term. Obrab. Met., No. 7, 3 (1969).
E. A. Smol'nikov and F. I. Zhadanova, Salt Baths for Heat Treatment of Parts [in Russian], Mashgiz, Moscow (1963), p. 97.
S. A. Saltykov, Stereometric Metallography [in Russian], 2nd, ed., Metallurgizdat, Moscow (1958), pp. 267, 312.
V. D. Sadovskii, "Block structure and recrystallization of austenite in high-speed steel," Metalloved. Term. Obrab. Met., No. 1, 51 (1961).
Yu. M. Chizhikov, Rollability of Steels and Alloys [in Russian], Metallurgiya, Moscow (1962), p. 141.
Yu. A. Geller, Tool Steels [in Russian], Metallurgiya, Moscow (1968), pp. 52, 396.
Additional information
Tomsk Polytechnic Institute. Translated from Metallovedenie i Termicheskaya Obrabotka Metallov, No. 9, pp. 52–55, September, 1978.
Rights and permissions
About this article
Cite this article
Khazanov, I.O., Egorov, Y.P. Hot deformation and recrystallization of high-speed steel R18. Met Sci Heat Treat 20, 746–749 (1978). https://doi.org/10.1007/BF00703757
Issue Date:
DOI: https://doi.org/10.1007/BF00703757