Literature cited
Yu. A. Geller, Tool Steels [in Russian], Metallurgiya, Moscow (1975).
A. P. Gulyaev, K. A. Malinina, and S. M. Saverina, Tool Steels. Handbook [in Russian], Mashinostroenie, Moscow (1975).
Akasu Ovaku, J. Iron Steel Inst. Jpn.,41, No. 11, 1184 (1955).
Yu. A. Geller and V. F. Artyukhov, "Effect of annealing on the properties of high-speed steels," Metalloved. Term. Obrab. Met., No. 11, 17 (1976).
B. N. Shevelev, V. I. Egorov, and Yu. A. Evtyushkin, Friction Welding of Tools With Large Sections (d=35–75 mm) [in Russian], Data Sheet No. 120-76, TsNTI (1976).
N. D. Andreev, "Quality of the weld seams in tools in relation to tempering temperature," Metalloved. Term. Obrab. Met., No. 8, 57 (1969).
I. N. Kovalenko and A. A. Filippova, Theory of Probability and Mathematical Statistics [in Russian], Vysshaya Shkola, Moscow (1973).
T. I. Golikova and L. A. Panchenko, "Systematization of plans for calculating polynomial models of the second kind," in: Planning Optima Experiments [in Russian], M. B. Malyutov (ed.), Moscow State Univ. (1975).
A. M. Korikov, Mathematical Methods of Planning Experiments [in Russian], Tomsk. Univ. (1973).
A. N. Dobrovidov et al., "Selecting the optima conditions for friction welding of high-speed steel R6M5 with carbon steel 45," Svar. Proizvod., No. 3, 17 (1975).
A. N. Dobrovidov et al., "Structure and properties of welded blanks of new high-speed steels," Metalloved. Term. Obrab. Met., No. 11, 22 (1976).
Yu. A. Evtyushkin et al., Friction Welding and End Milling Tools [in Russian], NIIMASh, Moscow (1977).
Technique of Welding Blanks of Metal-Cutting Tools. Guide Lines. [in Russian], K. P. Imshennik (ed.), VNII, Moscow (1966).
Additional information
S. M. Kirov Tomsk Polytechnical Institute. V. D. Kuznetsov Siberian Physicotechical Institute. Tomsk Factory of Cutting Tools. Translated from Metallovedenie i Termicheskaya Obrabotka Metallov, No. 9, pp. 39–43, September, 1978.
Rights and permissions
About this article
Cite this article
Dobrovidov, A.N., Korikov, A.M., Evtyushkin, Y.A. et al. Optimal high-temperature tempering of welded cutting tools. Met Sci Heat Treat 20, 732–736 (1978). https://doi.org/10.1007/BF00703754
Issue Date:
DOI: https://doi.org/10.1007/BF00703754