Literature cited
Yu. M. Pyatin (editor), Permanent Magnets. Handbook [in Russian], Énergiya, Moscow (1971).
B. G. Livshits et al., "Structure of alloy YuNDK35T5BA after hot deformation and heat treatment", Izv. Vyssh. Uchebn. Zaved., Chern. Metall., No. 3, 132 (1972).
B. A. Belikov et al., "Conditions for formation of texture in large cast magnets of alloy YuNDK35T5", Elektron. Tekh., Mater., Ser. 14, No. 1, 29 (1970).
S. S. Gorelik, "Recovery (rest, polygonization) and recrystallization", in: Metal Science and Heat Treatment [in Russian], Vol. 6, Metallurgiya, Moscow (1972), p. 5.
V. V. Sergeev et al., "Effect of magnetic field on the properties of alloy YuNDK35T5 in the process of thermomagnetic treatment", Metalloved. Term. Obrab. Met., No. 5, 62 (1968).
A. Higuchi and T. Miyamoto, IEEE Trans. Magnetics,6, No. 2, June, 218 (1970).
E. G. Povolotskii and Ya. M. Dovgalevskii, "Effect of the high-temperature condition on the properties of Alnico alloys," in: Reports of the All-Union Conference on Cast Alloys for Permanent Magnets [in Russian], Saratov (1964), p. 30.
A. A. Shekalov, "Magnetic and mechanical properties of alloys of the ANKoTi-5i type", in: Transactions of the All-Union Scientific-Research Institute of High-Frequency Current. Commercial Use of High-Frequency Current [in Russian], No. 6, Mashinostroenie, Moscow-Leningrad (1965), p. 148.
Additional information
Deceased.
Moscow Institute of Steel and Alloys. Translated from Metallovedenie i Termicheskaya Obrabotka Metallov, No. 12, pp. 61–63, December, 1978.
Rights and permissions
About this article
Cite this article
Nikolaeva, V.N., Konoplev, Y.V., Tsviling, M.Y. et al. Change in the substructure and texture of high-coercivity alloy YuNDK35T5BA during bending and upsetting. Met Sci Heat Treat 20, 1035–1037 (1978). https://doi.org/10.1007/BF00703288
Issue Date:
DOI: https://doi.org/10.1007/BF00703288