Literature cited
A. P. Gulyaev, Pure Steel [in Russian], Metallurgiya, Moscow (1975).
I. Kameda and C. Mahon, Met. Trans.,11A, No. 1, 91–101 (1980).
C. Mahon and V. Vitek, Acta. Met.27, No. 3, 507–513 (1979).
C. Briant and S. Banerji, Int. Met. Rev.,23, No. 4, 164–199 (1978).
R. Krahe and M. Guttmann, Scripta Met.,7, No. 4, 387–393 (1973).
A. Ucisik, C. Mahon, and H. Feng, Met. Trans.,9A, No. 4, 604–606 (1978).
G. A. Filippov, V. N. Marchenko, D. A. Litvinenko, et al. "Effect of impurities on the intercrystallite brittleness of steel 18Kh2N4VA after quenching and tempering," Probl. Prochn., No. 2, 114–119 (1980).
V. P. Kanev, S. A. Nikulin, M. A. Shtremel', and A. G. Sorokin, "Martensitic-austenitic steel with 5–9% of Mn," Metalloved. Term. Obrab. Met., No. 9, 61–63 (1980).
M. A. Shtremel', S. A. Nikulin, and V. P. Kanev, "Viscous failure of high-manganese steel," Izv. Akad. Nauk SSSR, Met., No. 6, 44–49 (1980).
L. Zaks, Statistical Evaluation [in Russian], Statistika, Moscow (1976).
Tables of Physical Values (Handbook) [in Russian], I. K. Kikoin (ed.), Atomizdat, Moscow (1976).
Additional information
Moscow Institute of Steels and Alloys. Translated from Metallovedenie i Termicheskaya Obrabotka Metallov, No. 12, pp. 23–26, December, 1983.
Rights and permissions
About this article
Cite this article
Nikulin, S.A., Shtremel, M.A. & Kanev, V.P. Antimony as a factor in grain-boundary brittleness. Met Sci Heat Treat 25, 898–902 (1983). https://doi.org/10.1007/BF00701955
Issue Date:
DOI: https://doi.org/10.1007/BF00701955