Literature cited
O. S. Kobyakov and E. G. Ginzburg, "The use of microplasma heating in hardening technology processes," Avtomat. Svarka, No. 5, 65–67 (1985).
A. A. Popov and L. E. Popova, Isothermal and Thermokinetic Curves of Decomposition of Supercooled Austenite: A Heat Treater's Handbook [in Russian], Metallurgiya, Moscow (1985).
H. S. Carslaw and J. C. Jaeger, Conduction of Heats in Solids, Oxford Univ. Press (1959).
B. E. Neimark (ed.), The Physical Properties of Steels and Alloys Used in Power Engineering (Handbook) [in Russian], Énergiya, Moscow-Leningrad (1967).
V. N. Gridnev, Yu. Ya. Meshkov, S. P. Oshkaderov, and V. I. Trefilov, Physical Fundamentals of Electrothermal Hardening of Steel [in Russian], Naukova Dumka, Kiev (1973).
I. N. Kidin, Phase Transformations in Accelerated Heating of Steel [in Russian], Metallurgizdat, Moscow (1957).
S. A. Astapchik, "Phase and structural transformations in steels and alloys in laser heating," Izv. Akad. Nauk BSSR. Ser. Fiz-Tekh. Nauk, No. 4, 30–37 (1982).
M. E. Blanter and A. A. Gol'denberg, Thermal Hardening of Low-Carbon Unalloyed Steel [in Russian], Mashinostroenie, Moscow (1967).
M. M. Khrushchov, "The rules of abrasive wear," in: Wear Resistance [in Russian], Moscow (1975), pp. 5–28.
Additional information
Belorussian Polytechnic Institute. A. V. Lykov Institute of Heat and Mass Transfer, Academy of Sciences of the Belorussian SSR. Translated from Metallovedenie i Termicheskaya Obrabotka Metallov, No. 5, pp. 10–13, May, 1988.
Rights and permissions
About this article
Cite this article
Ginzburg, E.G., Kobyakov, O.S., Geller, M.A. et al. Processes of nicroplasma hardening of steels. Met Sci Heat Treat 30, 327–331 (1988). https://doi.org/10.1007/BF00701039
Issue Date:
DOI: https://doi.org/10.1007/BF00701039