Literature cited
I. N. Shklyarov, V. B. Glasko, and N. I. Kulik, "Computer analysis of temperature fields with induction hardening of cylindrical parts", Metalloved. Term. Obrab. Met., No. 9, 30 (1977).
V. B. Glasko, N. I. Kulik, and I. N. Shklyarov, "One method of calculating temperature fields with use of indirect data on sources," Vestn. Mosk. Gos. Univ., No. 1, 36 (1978).
A. N. Tikhonov et al., "Some inverse problems of thermal conductivity," Zh. Vychisl. Mat. Mat. Fiz., 19, No. 3 (1979).
N. I. Kobasko, "Computer analysis of thermal processes during hardening of steels," Metalloved. Term. Obrab. Met., No. 10, 8 (1976).
K. Z. Shepelyakovskii, I. N. Shklyarov, and V. D. Kal'ner, "Use of simultaneous and continuous succession heating during surface hardening," Elektrotermiya, No. 73, 74, 51 (1968).
A. N. Tikhonov and V. B. Glasko, "Methods of determining the surface temperature of parts," Zh. Vychisl. Mat. Mat. Fiz.,7, No. 4, 910 (1967).
N. B. Vargaftik, Tables on the Thermophysical Properties of Liquids and Gases, Halsted Press (1975).
E. Houdremont, Special Steels [Russian translation], Vol. 1, Metallurgiya, Moscow (1966), p. 240.
I. N. Shklyarov et al., "Resistance to small plastic deformations of rolls subjected to surface induction hardening," Vestn. Mashinostr., No. 12, 59 (1967).
A. P. Gulyaev, Metal Science [in Russian], Metallurgiya, Moscow (1977), p. 166.
A. A. Popov and L. E. Popova, T−T−T and C−C−T Diagrams [in Russian], Metallurgiya, Moscow (1965).
Additional information
Moscow Automobile Factory. Moscow State University. Translated from Metallovedenie i Termicheskaya Obrabotka Metallov, No. 9, pp. 4–8, September, 1980.
Rights and permissions
About this article
Cite this article
Shklyarov, I.N., Glasko, V.B. & Kulik, N.I. Predicting the properties of steel parts after induction hardening with modeling of the process by computer. Met Sci Heat Treat 22, 623–627 (1980). https://doi.org/10.1007/BF00700682
Issue Date:
DOI: https://doi.org/10.1007/BF00700682