Literature cited
P. V. Sklyuev, Hydrogen and Flocs in Large Forgings [in Russian], Mashgiz, Moscow (1963).
P. V. Gel'd and R. A. Ryabov, Hydrogen in Metals and Alloys [in Russian], Metallurgiya, Moscow (1974), p. 66.
Yu. A. Bashnin, É. B. Mernik, É. A. Krylov, et al., "Investigation of the kinetics of the austenite transformation in large forgings and the refinement of high-floc-treatment regimes," Collection of Scientific Works of the Perm Polytechnic Institute [in Russian], No. 148 (1974), pp. 65–73.
A. I. Kondrashov, K. F. Gurdzhienko, and N. M. Kolesnik, Accelerated Heating and Cooling Regimes for Large Forgings, Transfer of Leading Experience. Heat Treatment [in Russian], TsBNTI, No. 1, Moscow (1959), pp. 15–17.
V. M. Korovina, V. A. Gubenko, Yu. A. Bashnin, and É. B. Mernik, "Computing the temperature field in a batch of large cylindrical blanks during cooling," Metalloved. Term. Obrab. Met., No. 9, 7–9 (1979).
Yu. A. Bashnin, V. N. Tsurkov, and V. M. Korovina, Heat Treatment of Large-Dimension Articles and Semifinished Products at Metallurgical Plants [in Russian], Metallurgiya, Moscow (1985), p. 116.
V. Yu. Slyusarev, I. V. Leirikh, V. G. Kochergin, and N. I. Bodnya, "Effect of heat treatment on the machinability of low-carbon chromium-molybdenum steels," Metalloved. Term. Obrab. Met., No. 7, 62–63 (1986).
Additional information
MVMI. Translated from Metallovedenie i Termicheskaya Obrabotka Metallov, No. 9, pp. 41–45, September, 1988.
Rights and permissions
About this article
Cite this article
Bashnin, Y.A., Mernik, É.B. Energy-saving technology for the preliminary heat treatment of large forgings. Met Sci Heat Treat 30, 694–697 (1988). https://doi.org/10.1007/BF00700364
Issue Date:
DOI: https://doi.org/10.1007/BF00700364