Mechanics of Composite Materials

, Volume 29, Issue 2, pp 175–180 | Cite as

Adhesive strength in thermoplastic polymer-thin fiber systems. Measured value as a function of the testing method

  • E. V. Pisanova
  • S. F. Zhandarov
  • V. A. Dovgyalo


Adhesive Strength Fiber System 
These keywords were added by machine and not by the authors. This process is experimental and the keywords may be updated as the learning algorithm improves.


Unable to display preview. Download preview PDF.

Unable to display preview. Download preview PDF.

Literature cited

  1. 1.
    S. F. Zhandarov, E. V. Pisanova, and V. A. Dovgyalo, “Fragmentation of a single fiber in stretching in the matrix as a method of determination of adhesion,” Mekh. Kompozitn. Mater., No. 3, 384–403 (1992).Google Scholar
  2. 2.
    M. R. Piggot, P. S. Chua, and D. Andison, “The interface between glass and carbon fibers and thermosetting polymers,” Polym. Composites,6, No. 4, 242–247 (1985).Google Scholar
  3. 3.
    B. Miller, P. Muri, and L. Rebenfeld, “Microbond method for determination of the shear strength of a fiber/resin interface,” Composite Sc. Tech.,28, No. 1, 17–32 (1987).Google Scholar
  4. 4.
    S. L. Chuang, N. J. Chu, and W. T. Whang, “Effect of polyamic acids on interfacial shear strength in carbon fiber/aromatic thermoplastics,” J. Appl. Polymer Sci.,41, 373–382 (1990).Google Scholar
  5. 5.
    Yu. A. Gorbatkina, Adhesive Strength in Polymer-Fiber Systems [in Russian], Moscow (1987).Google Scholar
  6. 6.
    V. A. Dovgyalo, S. F. Zhandarov, and E. V. Pisanova, “Determination of adhesive strength in the thermoplastic-thin fiber system,” Mekh. Kompozitn. Mater., No. 1, 9–12 (1990).Google Scholar
  7. 7.
    V. P. Tamuzh, Yu. G. Korabel'nikov, I. A. Rashkovan, A. A. Karklin'sh, Yu. A. Gorbatkina, and T. Yu. Zakharova, “Determination of the scale dependence of the strength of fibrous fillers and evaluation of their adhesion to the matrix with the results of tests of elementary fibers in a polymer block,” Mekh. Kompozitn. Mater., No. 4, 641–647 (1991).Google Scholar
  8. 8.
    R. B. Henstenburg and S. L. Phoenix, “Interfacial shear strength studies using the single-filament-composite test. Part II: A probability model and Monte-Carlo simulation,” Polym. Composites,10, No. 5, 390–408 (1989).Google Scholar
  9. 9.
    D. Jacques and J. P. Favre, “Determination of the interfacial shear strength by fiber fragmentation in resin systems with a small rapture strain,” in: ICCM and ECCM: Proceedings of the 6th International Conference on Composite Materials, Vol. 5, London-New York (1987), pp. 471–480.Google Scholar
  10. 10.
    A. T. DiBenedetto, “Evaluation of fiber surface treatments in composite materials,” Pure Appl. Chem.,57, No. 11, 1659–1665 (1985).Google Scholar
  11. 11.
    L. T. Drzal, “Interfacial behavior of aramid and graphite fibers in an epoxy matrix,” 15th National SAMPE Techn. Conference, Vol. 15, Azusa, California (1983), pp. 190–201.Google Scholar
  12. 12.
    E. V. Pisanova, S. F. Zhandarov, and V. A. Dovgyalo, “Interfacial adhesion and failure modes in single filament thermoplastic composites,” Polym. Composites (in press).Google Scholar
  13. 13.
    W. D. Bascom and R. M. Jensen, “Stress transfer in single fiber/resin tensile test,” J. Adhes.,19, 219–226 (1986).Google Scholar
  14. 14.
    T. Ohsawa, A., Nakayama, M. Miwa, and A. Hasegawa, “Temperature dependence of critical fiber length for glass fiberreinforced thermosetting resins,” J. Appl. Polym. Sci.,22, 3203–3212 (1978).Google Scholar
  15. 15.
    A. N. Netravali, P. Schwartz, and S. L. Phoenix, “Study of interfaces of high-performance glass fibers and DGEBA-based epoxy resins using single-fiber-composite test,” Polym. Composites,10, No. 6, 385–388 (1989).Google Scholar
  16. 16.
    A. S. Wimolkiatisak and J. P. Bell, “Interfacial shear strength and failure modes of interphase-modified graphite-epoxy composites,” Polym. Composites,10, No. 3, 162–172 (1989).Google Scholar
  17. 17.
    L. T. Drzal, M. J. Rich, M. Koenig, and P. F. Lloyd, “Adhesion of graphite fibers to epoxy matrices. II. The effect of fiber finish,” J. Adhes.,16, 133–152 (1983).Google Scholar

Copyright information

© Plenum Publishing Corporation 1993

Authors and Affiliations

  • E. V. Pisanova
    • 1
  • S. F. Zhandarov
    • 1
  • V. A. Dovgyalo
    • 1
  1. 1.Institute of Mechanics of Metal-Containing Polymer SystemsBelarus Academy of SciencesGomel'

Personalised recommendations