Abstract
SnSe2 thin films were prepared on glass substrate by thermal evaporation method. The resistivity of the films were measured in the temperature range 30–200 °C. It is observed that the as grown films are highly resistive and on heating the resistance abruptly changes. The heating and cooling curves of log of resistance versus temperature are not reproducible till the third cycle and this reproducible curve is similar to that for the films annealed at 200 °C for 3 hours.
Similar content being viewed by others
References
G. DOMINGO, S. ITOGO and C. KANNEWANF,Phys. Rev. 143 (1966) 536.
V. P. BHATT, GIREESAN K. and C. F. DESAI,Cryst. Res. Technol. 25 (1990) 209.
Idem, J. Crystal Growth 96 (1989) 649.
L. J. VAN DER PAUW,Philips Res. Rep. 13 (1958) 1.
S. A. GOSWAMI and S. M. OJNA,Thin Solid Films 16 (1973) 187.
V. P. BHATT and GIREESAN K.J. Mater. Sci. Lett. 9 (1990) 362.
M. PERSIN, B. CHLUSIKA, B. MARKOVIC and A. PERSIN,Thin Solid Films 5 (1970) 123.
M. PERSIN, A. PERSIN and B. CHLUSTKA, ibid.12 (1972) 117.
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Bhatt, V.P., Gireesan, K. Influence of heat treatment on electrical properties of thermally evaporated tin diselenide (SnSe2) thin films. J Mater Sci: Mater Electron 2, 4–6 (1991). https://doi.org/10.1007/BF00694995
Received:
Accepted:
Issue Date:
DOI: https://doi.org/10.1007/BF00694995