Metal Science and Heat Treatment

, Volume 14, Issue 3, pp 255–256 | Cite as

The effect of different additions on the wear resistance of forged steel 110G13

  • L. I. Parfenov
  • V. M. Glazkov
  • G. A. Sorokin
  • Yu. D. Novomeiskii
  • A. E. Matyuk
Technical Information
  • 16 Downloads

Conclusions

  1. 1.

    Forged high-manganese steel has a higher wear resistance than the cast steel.

     
  2. 2.

    Alloying additions improve the wear resistance of the forged steel, but to a lesser extent than for the cast steel.

     
  3. 3.

    A correlation was found between the wear resistance of the experimental steels and the strength and plastic characteristics under different wear conditions.

     

Keywords

Wear Resistance Cast Steel High Wear Resistance Wear Condition Experimental Steel 

Literature cited

  1. 1.
    V. D. Kuznetsov, Dokl. Akad. Nauk SSSR,84, No. 5 (1952); Zh. Tekh. Fiz.,22, No. 9 (1952).Google Scholar
  2. 2.
    Yu. D. Novomeiskii and V. M. Glazkov, High-Manganese Austenitic Steel G13L [in Russian], Metallurgiya, Moscow (1969).Google Scholar
  3. 3.
    V. M. Glazkov et al., Izv. Vuz. Fiz., No. 11 (1969).Google Scholar

Copyright information

© Consultants Bureau, a division of Plenum Publishing Corporation 1972

Authors and Affiliations

  • L. I. Parfenov
  • V. M. Glazkov
  • G. A. Sorokin
  • Yu. D. Novomeiskii
  • A. E. Matyuk

There are no affiliations available

Personalised recommendations