Advertisement

International Journal of Fracture

, Volume 17, Issue 6, pp R151–R151 | Cite as

On the relationship between work and crack tip stress intensity in elasticity and plasticity

  • C. E. Turner
  • P. C. Paris
  • H. Erns
Article

Keywords

Mechanical Engineer Civil Engineer Stress Intensity 
These keywords were added by machine and not by the authors. This process is experimental and the keywords may be updated as the learning algorithm improves.

References

  1. [1]
    C.E. Turner,Material Science Engineering 11 (1973) 275–282.Google Scholar
  2. [2]
    C.K.S. Wou, Fracture Mechanics and the Relation between J and Strain Energy in Three-Point Bending, M.Sc. Thesis, University of London, (1972).Google Scholar
  3. [3]
    C.E. Turner, inPost-Yield Fracture Mechanics, Applied Science Publishers, Essex (1979) Ch. 2.Google Scholar
  4. [4]
    J.R. Rice, P.C. Paris, and J.G. Merkle, Some Further Results on J-Integral Analysis and Estimates,Progress in Flaw Growth and Fracture Toughness Testing, STP 536, American Society for Testing and Materials, Philadelphia (1973) 231–245.Google Scholar
  5. [5]
    H.A. Ernst, Techniques of Analysis of Load-Displacement Records by J-Integral Methods, Ph.D. Thesis, University of Washington, (1979); see also: H.A. Ernst and P.C. Paris, NUREG/CR 1222 January, 1980.Google Scholar
  6. [6]
    C.E. Turner, The Ubiquitous n Factor.Fracture Mechanics: Twelfth Conference, STP 700, American Society for Testing and Materials, Philadelphia (1980) 314–337.Google Scholar
  7. [7]
    H. Ernstet al., inFracture Mechanics, STP 677, American Society for Testing and Materials, Philadelphia (1979) 581–599.Google Scholar
  8. [8]
    P.C. Paris, H. Ernst, and C.E. Turner, inFracture Mechanics: 12th National Symposium, STP 700, American Society for Testing and Materials, Philadelphia (1980) 338–351.Google Scholar
  9. [9]
    A.A. Illyushin, Plasticité, Déformations Elastico-Plastiques, Eyrolles, Paris (1956).Google Scholar
  10. [10]
    J.D.G. Sumpter, Elastic-Plastic Fracture Analysis and Design Using the Finite Element Method, Ph.D. Thesis, University of London (1973/74).Google Scholar

Copyright information

© Sijthoff & Noordhoff International Publishers 1981

Authors and Affiliations

  • C. E. Turner
    • 1
  • P. C. Paris
    • 2
  • H. Erns
    • 3
  1. 1.Department of Mechanical EngineeringImperial College Exhibition RoadLondon SW7UK
  2. 2.Center for Fracture MechanicsWashington University St. LouisMissouriUSA
  3. 3.Research and Development LaboratoriesWestinghouse Electric Corp. Beulah RoadPittsburghUSA

Personalised recommendations