Abstract
The colorimetric characteristics of film coatings obtained from iron-containing industrial waste are determined by instrumental methods. The relationship between the composition of the film-forming solution, the temperature and time regimes of treatment, and the colorimetric characteristics of film coatings such as lightness, brightness, and intensity (purity) of hue is described.
Similar content being viewed by others
References
R. D. Sytnik, I. G. Kiuila, O. A. Ignatyk, and S. A. Sytnik, “Depositing oxide-metallic coatings on aluminoborosilicate glass,”Steklo Keram., No. 2, 7–9 (1994).
R. D. Sytnik, I. G. Kiuila, and O. A. Ignatyuk, “ On the possibility of using waste from metallurgical production of the Donbas Region for fabricating strengthened glass and articles from it,”Proc. All-Union Seminar on Problems of Glass Strength and Glass Crystalline Materials [in Russian], Konstantinovka (1991), p. 33.
R. D. Sytnik, I. G. Kiuila, and O. A. Ignatyuk, “Investigation of the physicochemical properties and operating characteristics in the system” film-forming solution-surface of high-temperature glass kitchenware,”Proc. of Int. Sci. Tech. Conf. on the Technology and Quality of Glass [in Russian], Konstantinovka (1993), p. 78.
Author information
Authors and Affiliations
Additional information
Translated from Steklo i Keramika, No. 3, pp. 12–13, March, 1995.
Rights and permissions
About this article
Cite this article
Sytnik, R.D., Kiuila, I.G. & Ignatyuk, O.A. Effect of the composition of film-forming solutions and the temperature and time regimes on the colorimetric characteristics of film coatings. Glass Ceram 52, 62–63 (1995). https://doi.org/10.1007/BF00680309
Issue Date:
DOI: https://doi.org/10.1007/BF00680309