Glass and Ceramics

, Volume 52, Issue 6, pp 135–136 | Cite as

Use of spent catalysts for synthesis of undercoat enamels

  • N. T. Shardakov
  • V. A. Deryabin
Environmental Protection


The possibility of using spent catalysts of some oil refining processes for synthesis of undercoat enamels is established. A simplex-grid plan {4,2} is used to describe the dependence of water resistance and wettability of the enamels on the composition. The regularities obtained as a result of this analysis are used to choose the optimum composition.


Polymer Wettability Water Resistance Refining Process Optimum Composition 
These keywords were added by machine and not by the authors. This process is experimental and the keywords may be updated as the learning algorithm improves.


  1. 1.
    I. G. Zedgenidze,Planning Experiments for Investigating Multi-component Systems [in Russian], Nauka, Moscow (1976).Google Scholar
  2. 2.
    S. I. Popel',Surface Phenomena in Melts [in Russian], Metallurgiya, Moscow (1994).Google Scholar
  3. 3.
    B. G. Stephem, M. O'Brien, H. A. Ben, and A. van der Brule, “ Shape of a small sessible drop and the determination of contact,”J. Chem. Faraday Trans.,87(10), 1579–1583 (1991).Google Scholar
  4. 4.
    L. S. Zazhigaev, A. A. Kish'yan, and Yu. I. Romanikov,Methods for Planning and Processing the Results of a Physical Experiment [in Russian], Atomizdat, Moscow (1978).Google Scholar

Copyright information

© Plenum Publishing Corporation 1996

Authors and Affiliations

  • N. T. Shardakov
    • 1
  • V. A. Deryabin
    • 1
  1. 1.Ural State Engineering UniversityEkaterinburgRussia

Personalised recommendations