Advertisement

Glass and Ceramics

, Volume 52, Issue 10, pp 262–266 | Cite as

Hydrostatic pressing of glass powder materials

  • V. N. Sigaev
  • P. D. Sarkisov
  • A. B. Mamonov
  • T. E. Konstantinova
  • E. I. Lyafer
Science for Glass Production

Abstract

Hydrostatic pressing of powdered glass makes it possible to prepare sintered high-density specimens from glass of any crystallizability. The mechanical and electrical strengths of the specimens considerably exceed the analogous characteristics of materials obtained by pressing in metallic molds and sintered at the same temperature.

Keywords

Polymer Mold Powder Material Glass Powder Electrical Strength 
These keywords were added by machine and not by the authors. This process is experimental and the keywords may be updated as the learning algorithm improves.

Preview

Unable to display preview. Download preview PDF.

Unable to display preview. Download preview PDF.

References

  1. 1.
    S. S. Kiparisov and G. A. Libenson,Powder Metallurgy [in Russian], Metallurgiya, Moscow (1991).Google Scholar
  2. 2.
    M. I. Tikhomirova and Yu. N. Sil'vestrov, “Isostatic pressing of ceramic articles,”Élektron. Tekhnika, Ser. Materialy, No. 3, 94 - 100 (1972).Google Scholar
  3. 3.
    M. I. Tikhomirova and V. S. Rachkov, “Quasi-isostatic pressing in the production of ceramics,”Steklo Keram., No. 7, 17 - 19 (1991).Google Scholar
  4. 4.
    R. V. Dzerzhinskii, M. I. Tikhomirova, and V. S. Rachkov, “Special features of molds for isostatic pressing,”Steklo Keram., No. 6, 16 - 18 (1992).Google Scholar
  5. 5.
    M. I. Tikhomirova and A. F. Panteleeva, “Compactibility of ceramic press-powder from 22KhS material prepared by spraying,”Élektron. Tekhnika, Ser. Materialy, No. 2, 67 - 73 (1978).Google Scholar
  6. 6.
    N. A. Litvinova and M. I. Tikhomirova, “Production of tube piezocells by the method of quasi-isostatic pressing,”Nov. Med. Priborostr., No. 5, 19 - 21 (1981).Google Scholar
  7. 7.
    I. Falcone, “Forming technologies for ceramics industry: isostatic dry pressing of flature and pressure casting for sanitarymone,”Ceram. Eng. Sci. Proc., Nos. 1–2, 42 - 48 (1989).Google Scholar
  8. 8.
    C. I. Helgesson, “Properties of cordierite glass ceramics produced by sintering and crystallization of glass powder,”Sci. Ceram.,8, 347 - 361 (1976).Google Scholar
  9. 9.
    V. N. Sigaev, L. E. Aslanyan, V. Yu. Orlova, and R. Ya. Khodakovskaya, “Effect of technological factors on crystallization of cordierite glasses,” in:5th Int. Cong. Calorimetry and Thermal Analysis, Kharkow (1991), pp. 27 – 29.Google Scholar
  10. 10.
    M. Kirsch, R. Muller, and P. O. Kunth, “Understuchung der Sinter Kristallisation an Cordieritglasern mit Hilfe der DTA-Methode,”Silekattechn., No. 8, 236 - 238 (1982).Google Scholar
  11. 11.
    E. A. Takher and T. I. Fedoseeva, “Special features of crystallization processes in sitalls based on finelly dispersed glass powders,” in:Crystallized Crystallization of Glass. Proc. All-Union Conf. [in Russian], (1986), pp. 29 – 34.Google Scholar
  12. 12.
    A. M. Kalinina, M. Kirsh, and V. N. Filipovich, “Effect of the degree of dispersion of cordierite glass powder on the crystallization kinetics of μ-cordierite in it,”Fiz. Khim. Stekla,12(5), 520 - 526 (1986).Google Scholar
  13. 13.
    R. C. C. Monteiro, M. M. R. A. Lima, and F. I. F. Silva, “Sintering and crystallization of cordierite glass powders,” in:16th Int. Cong. Glass, Vol. 2, Madrid (1992), pp. 253 - 258.Google Scholar
  14. 14.
    V. I. Solov'ev, “The role of crystallization catalysts in the powder technology of sitalls” in:Crystallized Crystallization of Glass. Proc. State Res. Inst. Glass [in Russian], Moscow (1986), pp. 111 – 114.Google Scholar
  15. 15.
    V. N. Sigaev, P. D. Sarkisov, L. É. Aslanyan, et al., “Effect of technological factors on crystallization of cordierite glasses,”Fiz. Khim. Stekla,20(6), 722 - 778 (1994).Google Scholar
  16. 16.
    P. D. Tykachinskaya, V. V. Budov, and R. Ya. Khodakovskaya, “Processes of sintering and crystallization in glass under hot pressing” in:Modern Problems of Powder Metallurgy, Ceramics, and Composite Materials [in Russian], Kiev (1990), pp. 61 – 64.Google Scholar
  17. 17.
    N. M. Pavlushkin, G. G. Sentyurin, and R. Ya. Khodakovskaya,Practical Works on the Technology of Glass and Sitalls [in Russian], Stroiizdat, Moscow (1970).Google Scholar
  18. 18.
    V. Ya. Zlenko, D. P. Valyukhov, and A. T. Ushakov, “Nature of surface disruption of glass insulators in electrical connections,”Steklo Keram., No. 8, 15 - 16 (1991).Google Scholar
  19. 19.
    L. G. Samkova, A. I. Moskalenko, K. L. Sobecheva, et al., “Operating reliability of high-voltage suspended glass insulators,”Steklo Keram., No. 8, 6 - 7 (1991).Google Scholar

Copyright information

© Plenum Publishing Corporation 1996

Authors and Affiliations

  • V. N. Sigaev
    • 1
    • 2
  • P. D. Sarkisov
    • 1
    • 2
  • A. B. Mamonov
    • 1
    • 2
  • T. E. Konstantinova
    • 1
    • 2
  • E. I. Lyafer
    • 1
    • 2
  1. 1.D. I. Mendeleev Russian Chemical Engineering UniversityMoscowRussia
  2. 2.Donetsk Physicotechnical InstituteDonetskUkraine

Personalised recommendations