Advertisement

Metal Science and Heat Treatment

, Volume 17, Issue 11, pp 969–970 | Cite as

Susceptibility to intercrystalline corrosion of pipe made of steel Kh17N13M2T

  • O. S. Vil'yams
  • N. M. Bol'shova
  • O. V. Oleinik
Technical Information
  • 12 Downloads

Conclusions

  1. 1.

    The temperature threshold of resistance to ICC is 50° higher for heat 1 than for heat 2 with the same concentrations of carbon and titanium (with Ti: C=7.5).

     
  2. 2.

    The high susceptibility of heat 1 to carburizing is the main reason for its susceptibility to ICC.

     
  3. 3.

    Thorough removal of lubricants in nitric-hydrofluoric acid solution before heat treatment greatly reduced susceptibility to ICC.

     

Keywords

Titanium Heat Treatment Acid Solution High Susceptibility Temperature Threshold 
These keywords were added by machine and not by the authors. This process is experimental and the keywords may be updated as the learning algorithm improves.

Literature cited

  1. 1.
    O. S. Vil'yams, N. M. Bol'shova, and S. K. Nezhivaya, “Carburizing of stainless steel,” in: Production of Pipe [in Russian], No. 11 (1963), p. 103.Google Scholar
  2. 2.
    V. Chigal, Intercrystalline Corrosion of Stainless Steels [in Russian], Khimiya, Leningrad (1969), p. 156.Google Scholar
  3. 3.
    V. S. Mes'kin, Fundamentals of Alloying Steel [in Russian], Metallurgiya, Moscow (1964), p. 26.Google Scholar

Copyright information

© Plenum Publishing Corporation 1976

Authors and Affiliations

  • O. S. Vil'yams
  • N. M. Bol'shova
  • O. V. Oleinik

There are no affiliations available

Personalised recommendations