Literature cited
V. Dedek, Strip Steel for Deep Drawing [in Russian], Metallurgiya, Moscow (1970).
D. A. Litvinenko, Cold-Rolled Nonaging Steel [in Russian], Metallurgiya, Moscow (1968).
V. I. Meleshko, A. P. Kachailov, and V. L. Mazur, Advanced Methods for Rolling and Finishing Sheet Steel [in Russian], Metallurgiya, Moscow (1980).
G. I. Bel'chenko, V. I. Bidash, S. I. Gubenko, et al., "Rational working and annealing schedules for low-carbon steels," Metal. Gorn. Prom., No. 3, 30–31 (1983).
V. N. Gridnev, V. G. Gavrilyuk and Yu. Ya. Meshkov, Strength and Ductility of Cold-Worked Steel [in Russian], Naukova Dumka, Kiew (1974).
V. A. Bafanova and G. D. Sukhomlin, "Spheroidization of cementite in steel," Metalloved. Term. Obrab. Met., No. 11, 51 (1981).
V. K. Babich, Yu. P. Gul' and I. E. Dolzhenkov, Strain Aging of Steel [in Russian], Metallurgiya, Moscow (1972).
D. Lupton and D. Waringtone, Met. Sci.,6, 200–204 (1972).
K. E. Puttick, J. It. Steel Inst., No. 2, 185 (1957).
K. P. Bunin, A. A. Baranova and É. N. Pogrebnoi, Graphitization of Steel [in Russian], Izd. Akad. Nauk UkrSSR, Kiev (1961).
I. E. Dolzhenkov and I. I. Dolzhenkov, Spheroidization of Carbides in Steel [in Russian], Metallurgiya, Moscow (1984).
V. G. Gavrilyuk, Fiz. Met. Metalloved.,45, No. 5, 968–980 (1978).
K. P. Bunin and A. A. Baranov, Metallography [in Russian], Metallurgiya, Moscow (1970).
A. A. Baranov, K. P. Bunin, É. D. Glebova, and M. I. Pritomanova, Growth of Cast Iron and Steel during Thermal Cycling [in Russian], Tekhnika, Kiev (1967).
Additional information
Translated from Metallovedenie i Termicheskaya Obrabotka Metallov, No. 2, pp. 23–25, February, 1987.
Rights and permissions
About this article
Cite this article
Bidash, V.I., Prikhod'ko, A.I. Graphitization of low-carbon steel during a spheroidizing anneal. Met Sci Heat Treat 29, 116–119 (1987). https://doi.org/10.1007/BF00667521
Issue Date:
DOI: https://doi.org/10.1007/BF00667521